00195397-01_Installation Manual Setup Center 2.3.pdf - 第18页

Installation Hardware Installation Dragon Scanner’s Cradle 18 Installation Manual SIPLACE Setup Center 2.3 5.2 Hardware Inst allation We recommend performing the installation in the specified order: 1. Installation of ha…

Installation

Operation System Installation Important Preparations

Installation Manual SIPLACE Setup Center 2.3

5 Installation

5.1 Important Preparations

All computers must have been set up and prepared appropriately in advance of the complete installation

of SIPLACE Setup Center to function correctly.

These preparatory measures demand knowledge about the administrative functions of Windows and

SQL Server. Please contact your system administrator for assistance if required.

5.1.1 Operation System Installation

The following steps are essential before conducting the installation of SIPLACE Setup Center:

 Installation of Windows 2003 or Windows XP with SP2.

 Furthermore, you require Windows 2003/XP administrative rights and write rights for all computers

on which you are installing SIPLACE Setup Center.

5.1.2 MSDE Installation

If the database decision of SIPLACE Setup Center Database (see chapter) is made to use a MSDE

installation, this must be done prior installing SIPLACE Setup Center.

Installing MSDE is done by executing the file

\3rdpartyinstaller\MSDE\SETUP_Step.cmd

on the

Setup CD.

If the TCP port 1433 is not available then the alternate installer

\3rdpartyinstaller\MS-

DE\SETUP_Step_dynamic_port.CMD

must be used.

See the file

\3rdpartyinstaller\MSDE\readme.txt

for more details.

NOTE:

Always exit the running setup verification via task manager/process before the installation or

uninstallation of Setup Center.

NOTE:

It is not necessary to uninstall the current version of Setup Center before the installation of the

new version of Setup Center.

NOTE:

If during the installation a note appears, that Microsoft Data Access Components (MDAC) must

be installed. Accept this note.

NOTE:

You are required to have administrator rights for the installation procedure!

NOTE:

This installer creates a MSDE instance with the name SIPLACE_MSDE.

Installation

Hardware Installation Dragon Scanner’s Cradle

18 Installation Manual SIPLACE Setup Center 2.3

5.2 Hardware Installation

We recommend performing the installation in the specified order:

1. Installation of hardware

2. Installation of software

This chapter describes the hardware installation procedure.

5.2.1 Dragon Scanner’s Cradle

 The Dragon scanner’s cradle needs to be connected to the Setup Center PC’s COM-port. The

default port is COM1.

 If the COM1 port is already in use another COM port need to be configured

(Another port can be configured in the Setup Center after installation:

open Setup Center setting dialog – menu Options/Settings – dialog Scanner/Dragon Scanner/Serial

Port).

 Connect the cradle to the Setup Center PC according to the following picture:

5-1: RS232 connection

5.2.2 Safety Instructions

The Dragon Scanner conforms to laser class 2.

Warning label W216 (shown above) is displayed on the Dragon scanner.

5.2.3 Symbol MC70 2D barcode scanner

5.2.3.1 System Requirements

The following components are required for the operation of the scanner:

 WLAN-infrastructure (not included)

 MC70 Scanner with firmware 01.21.0001

DANGER: LASER RADIATION!

Do not look into beam.

Laser class 2

WARNING: CAUTION:

Before using the Dragon scanner, inform all operating personnel about the laser regulations.

While operating the Dragon scanner, observe the respective regulations in line with VDE 0837

"Protection from radiation emitted by laser devices" and the "Laser radiation" accident

prevention regulations (VBG93), applicable in Germany.

Also observe the accident prevention regulations applicable in your country.

Despite the low laser power, avoid looking directly at the laser beam. The natural closure reflex

of your eyelids will protect your eyes from the visible beam.

Installation

Symbol MC70 2D barcode scanner Hardware Installation

Installation Manual SIPLACE Setup Center 2.3

 MC70 scanner integrated in WLAN-infrastructure and accessible with "ping" windows-command.

 SIPLACE Setup Center 2.3

5.2.3.2 Configurate WLAN on Scanner

Please. configurate the barcode scanner for the operation within WLAN network - as described in

document Installation Manual WLAN Infrastructure for SIPLACE (item no. 00195607-xx).

5.2.3.3 Setup Center Client Installation

The installation for Setup Center – MobileScanner is located in the root directory of the CD

"\MobileScanner\MC70\". Execute the file "Setup.exe" to start the installation.

X Select "Continue" to proceed with the installation.

Step 1: Install ActiveSync

If ActiveSync is not installed on the system, the installation of Microsoft ActiveSync will be executed.

Make sure that the scanner is not yet connected to the basic station.

NOTE:

The MC70 might be delivered with a newer firmware version. Pls. install the firmware version

listed above if problems with the newer version occur. It is located on the Setup Center CD in

directory "\3rdparty installer\Symbol MC70\". Pls. observe by all means the enclosed

documentation.

NOTE:

You'll find more informationen regarding WLAN-configuration of the MC70 Scanner within the

enclosed Symbol-documentation.