CX200-4(Maint).pdf - 第216页

Error ID ltem Description 4b0308 ILLEGAL OPERA TION P .C.B. W AS TOOK ON INPUT BUFFER CONVEYOR. Cause 1) Self-Diagnostics Error Message (Remedy 1) Zero all axes and re-start the operation. When the machine cannot be set …

100%1 / 299
Error ID ltem Description
4b0302 ILLEGAL OPERATION P.C.B. WAS TOOK ON CONVEYOR.
(Cause 1) An improper P.C.B. is put on the conveyor.
(Remedy 1) Press the [RETURN] button to cancel the error display and remove the improper
P.C.B.
After that, place a proper P.C.B. on the conveyor, zero all axes, and re-start the
production.
4b0303 ILLEGAL OPERATION P.C.B. REMOVE FROM CONVEYOR.
(Cause 1) A proper P.C.B. was removed from the conveyor.
(Remedy 1) Press the [RETURN] button to cancel the error display and place a proper P.C.B.
on the conveyor, Then, zero all axes and re-start the production.
4b0304 ILLEGAL OPERATION THE OPERATION SW IS CHANGED IN EXCEPT STOP
STATE.
(Cause 1) The [OPERATION] switch was changed over.
(Remedy 1) Change over the [OPERATION] switch to the correct mode and press the [RE-
TURN] button. Then, continue the operation.
4b0305 ILLEGAL OPERATION THE OPERATION/SETUP SW HAS BEEN ENABLED WHILE
THE BACKPANEL IS USE.
(Cause 1) The [OPERATION] switch was changed over.
(Remedy 1) Change over the [OPERATION] switch to the correct mode and press the [RE-
TURN] button. Then, continue the operation.
4b0306 ILLEGAL OPERATION P.C.B. WAS TOOK ON X/Y TABLE.
(Cause 1) The P.C.B. on the X/Y table is improper.
Check it.
(Remedy 1) Remove the improper P.C.B. and start the production, using a proper P.C.B.
4b0307 ILLEGAL OPERATION SET-UP CAN NOT MOVE.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
01 10-003 2-126 AFO01ETRP
3.3 Error IDs and Remedial Procedures
Error ID ltem Description
4b0308 ILLEGAL OPERATION P.C.B. WAS TOOK ON INPUT BUFFER CONVEYOR.
Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
4b0309 ILLEGAL OPERATION P.C.B. WAS TOOK ON INPUT CONVEYOR.
(Cause 1) An improper P.C.B. exists on the transfer conveyor.
(Remedy 1) Remove the improper P.C.B. on the transfer conveyor and re-start the production.
4b030a ILLEGAL OPERATION P.C.B. WAS TOOK ON OUTPUT CONVEYOR.
(Cause 1) An improper P.C.B. exists on the output conveyor.
(Remedy 1) Remove the improper P.C.B. on the output conveyor and re-start the production.
4b030b ILLEGAL OPERATION P.C.B. REMOVE FROM INPUT BUFFER CONVEYOR.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
4b030c ILLEGAL OPERATION P.C.B. REMOVE FROM INPUT CONVEYOR.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
01 10-003 2-127 AFO01ETRP
3.3 Error IDs and Remedial Procedures
Error ID ltem Description
4b030d ILLEGAL OPERATION P.C.B. REMOVE FROM OUTPUT CONVEYOR.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
4c0101 B.B.R. All unit P.C.B.’s ware detected as defective. (P.C.B. on
XY-Table)
4c0102 B.B.R. All unit P.C.B.’s ware detected as defective. (P.C.B. on
Transfer Conveyor)
4c0201 Unit P.C.B. B.B.R. Information Not exist available information.(P.C.B. on Transfer Conveyor)
4c0202 Unit P.C.B. B.B.R. Information Not exist available information.(P.C.B. on Transfer XY-Table)
4c0203 Unit P.C.B. B.B.R. Information Communication data is illegal information.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Follow the described instructions and reset the machine to its normal condition
.
01 10-003 2-128 AFO01ETRP
3.3 Error IDs and Remedial Procedures