SC_450 PreciseCoat Conformal Coating Jet_Rev_04.pdf - 第51页
© 2024 Nordson Corporation 45 7 Parts Replacement 7.1 Overview This section inclu des general information f or ordering r ecommended spares and replac ement parts for the SC-450 Pr e c iseCoat Jet. WARNING! Parts rep l a…
© 2024 Nordson Corporation 45
7 Parts Replacement
7.1 Overview
This section includes general information for ordering recommended spares and replacement parts for
the SC-450 PreciseCoat Jet.
WARNING!
Parts replacement should only be performed by a trained service technician.
Nordson assumes no liability for personal injury or property damage that may
occur as a result of spare parts being replaced by a non-certified technician.
7.2 Safety First
Operation of your SC-450 PreciseCoat Jet involves heat, air pressure, electrical power, mechanical
devices, and the use of hazardous materials, and sometimes may involve heat. It is essential that every
person servicing the dispensing system or components fully understands all hazards, risks, and safety
precautions. See Section 2 - Safety for additional information.
WARNING!
DO NOT hot swap connections when working with electrical and pneumatic power
supplies. Turn the main circuit breaker off before disconnecting the external power
plug from the facility.
7.3 Parts Ordering Information
7.3.1 Placing Your Order
Customers can order spare parts by contacting Technical Support. Contact information is listed in the
front of this manual. Spare parts can also be ordered online through our Internet Web Store. To set up a
web store account, send an email to americas.es.cs@nordson.com.
When ordering parts, be prepared to provide the following information:
•
Your Company Name
•
Billing Address
•
Shipping Address
•
Part Number and Description of Part
•
Purchase Order Number
•
Quantity
• Coating System Serial Number
(found on back panel)
• Shipping Instructions with Collect
Account Number
7.3.2 Shipping Instructions
When ordering parts, specify which carrier you prefer to use and provide your shipping account number. If
no instructions are received, Technical Support will determine the best shipping method and items will be
shipped prepaid with the shipping charge added to the invoice.
SC-450 PreciseCoat Conformal Coating Jet Parts Replacement
46 © 2024 Nordson Corporation
7.4 Warranty
Contact Technical Support for any warranty issues pertaining to spare parts. Wear items and
consumables are covered under warranty against manufacturer defect only. Expected lifetimes for these
parts will vary based upon application and use.
Consumable parts are generally considered as parts that are replaced on a frequency of > 1 per calendar
year under expected regular usage. In most cases, these parts are “wetted parts” that make contact with
the dispensed fluid. Wear items are those items that have been identified to have limited life expectancy
(less than 5 years) but are not considered consumables. Wear items are often highly application
dependent, high user-touch, or adjusted parts.
7.5 Credit and Exchanges
Contact Technical Support for credit or exchanges of recommended spare parts or refurbished
components (components restored to original specifications but not sold as new).
7.5.1 Return Material Authorization
Contact Technical Support to obtain a Return Material Authorization (RMA) before returning any parts.
?
NOTE
Find your local Technical Support contact on the web page, www.nordsonasymtek.com.
7.6 Record Keeping
The type of service performed should be recorded in the PreciseCoat Jet maintenance records. Dates,
part numbers/serial numbers of replaced parts, names of technicians, and other pertinent data should be
recorded.
7.7 Unpacking and Inspecting Replacement Parts
Replacement parts are shipped to distributor or customer facilities in individual shipping cartons. Review
the packing slip to ensure that the correct parts were received. Contact Technical Support if any
discrepancies are discovered.
Before unpacking your spare parts, visually inspect the carton for damage. If applicable, check the
ShockWatch and the Tip N’ Tell stickers for indications of improper shipping and handling. Inform the
freight carrier of any damage.
7.8 Cleaning and Inspection
Always clean the area made visible after a failed part is removed from the dispensing system. Inspect the
area for signs of what may have caused the part to fail. This may help prevent future part damage. When
removing parts that will be reinstalled, visually inspect them for damage. If undamaged, retain them for
reinstallation. Replace damaged parts and hardware as appropriate.