SC_450 PreciseCoat Conformal Coating Jet_Rev_04.pdf - 第53页
SC-450 PreciseCoat C onformal C oating J et Parts Replaceme nt © 2024 Nordson Corporation 47 7.9 Spare Parts L is t Use the following ta bles to locate t he item nu mber corresponding to a procedure i n this technical ma…
SC-450 PreciseCoat Conformal Coating Jet Parts Replacement
46 © 2024 Nordson Corporation
7.4 Warranty
Contact Technical Support for any warranty issues pertaining to spare parts. Wear items and
consumables are covered under warranty against manufacturer defect only. Expected lifetimes for these
parts will vary based upon application and use.
Consumable parts are generally considered as parts that are replaced on a frequency of > 1 per calendar
year under expected regular usage. In most cases, these parts are “wetted parts” that make contact with
the dispensed fluid. Wear items are those items that have been identified to have limited life expectancy
(less than 5 years) but are not considered consumables. Wear items are often highly application
dependent, high user-touch, or adjusted parts.
7.5 Credit and Exchanges
Contact Technical Support for credit or exchanges of recommended spare parts or refurbished
components (components restored to original specifications but not sold as new).
7.5.1 Return Material Authorization
Contact Technical Support to obtain a Return Material Authorization (RMA) before returning any parts.
?
NOTE
Find your local Technical Support contact on the web page, www.nordsonasymtek.com.
7.6 Record Keeping
The type of service performed should be recorded in the PreciseCoat Jet maintenance records. Dates,
part numbers/serial numbers of replaced parts, names of technicians, and other pertinent data should be
recorded.
7.7 Unpacking and Inspecting Replacement Parts
Replacement parts are shipped to distributor or customer facilities in individual shipping cartons. Review
the packing slip to ensure that the correct parts were received. Contact Technical Support if any
discrepancies are discovered.
Before unpacking your spare parts, visually inspect the carton for damage. If applicable, check the
ShockWatch and the Tip N’ Tell stickers for indications of improper shipping and handling. Inform the
freight carrier of any damage.
7.8 Cleaning and Inspection
Always clean the area made visible after a failed part is removed from the dispensing system. Inspect the
area for signs of what may have caused the part to fail. This may help prevent future part damage. When
removing parts that will be reinstalled, visually inspect them for damage. If undamaged, retain them for
reinstallation. Replace damaged parts and hardware as appropriate.
SC-450 PreciseCoat Conformal Coating Jet Parts Replacement
© 2024 Nordson Corporation 47
7.9 Spare Parts List
Use the following tables to locate the item number corresponding to a procedure in this technical manual.
Nearly all spare parts are sold as part of a spares kit, with a few exceptions. To order parts, access
www.nordson.com/electronics, use the search feature to search for a kit part number or part description to
locate the appropriate spares list, and follow the instructions in that file to complete the ordering process.
Contact Technical Support for questions.
Figure 7-1 SC-450 Exploded View
2
1 & 22
19
1
1
8
1
6
4
5
21 & 22
1
7
1
4
11
10
8
2
1
3
1
5
1
2
3
7
6
SC-450 PreciseCoat Conformal Coating Jet Parts Replacement
48 © 2024 Nordson Corporation
Table 7-1 Spare Parts List
?
NOTE
The SC-450 PreciseCoat Jet is configured at the Nordson factory for your application. The
optimal needle and nozzle is determined based on your application needs. Contact
Technical Support for additional information.
Kit Part
Number
Kit Name
Item
Number
Description Quantity
6149906
KIT, IWASHITA NEEDLE,
SC-450
22
TIP, IWASHITA NEEDLE, SC-450 1
NUT, IWASHITA NEEDLE, SC-450 1
O-RING, 2.4MM ID, .7MM CS, VITON 2
6143530 KIT, SHIPPING, SC-450 23
11
O-RING, -008, EPDM 2
10
O-RING, 020, VITON 1
O-RING, 2.4MM ID, .7MM CS, VITON 10
ELBOW, 1/4TUBE X 1/8NPTM 2
19
U-CUP, VSPG, 2LIP, PI-PTFE, 1/8ROD 2
SCREW, M3X.5X16 SOCKET HEAD 7
5
SCREW, FH, SOC, M5X0.8X12, SS 1
3
SCREW, M4 X 0.7, SOCKET X 12 2
O-RING, 3.8MM ID, 1.1MM CS, VITON 1
TOOL, SEAL REMOVAL, PLASTIC 1
ASSY, PRESS TOOL, SEAL, SC280 1
CARD, TEST SELECT COAT SYST
(PKG OF 100)
1
LUBRICANT, DRY FILM PASTE 1
WRENCH, HEX 4MM T-HANDLE 1
WRENCH, 4", ADJUSTABLE, 0-.5" 1
INLET FITTING ASSEMBLY, ELB, 303SS 1
8
MUFFLER, 40UM, DISC, .5IN OD, .125IN
THK
2
INSERTION, TOOL, NEEDLE, DJ-9000 1
6655244 KIT,SERVICE, SC-450
10 O-RING, 020, VITON 4
LUBRICANT, DRY FILM PASTE 1
19 U-CUP, VSPG, 2LIP, PI-PTFE, 1/8 ROD 4
O-RING, 2.4MM ID, .7MM CS, VITON 25
ORING, 3.8MM ID, 1.1MM CS, VITON 4
11 O-RING, -008, EPDM 4
ASSY, FLUID BODY, SS 1
8
MUFFLER, 40UM, DISC, .5IN OD, .125IN
THK
2