OM-1273-004_w.pdf - 第18页
Safety Precautions Safe-7 AJK-ML T-ID Notes on Maintenance Only a well-trained service person should perform maintenance work carefully through for the machine in compliance with the instructions. Before maintenance…
Safety Precautions
Safe-6
AJK-MLT-ID
Notes on Installation, Transfer and Maintenance
Do not install or transfer the machine on the customer side after shipment.
T
o ensure perfect operation of the machine, including s
afety and accuracy
, only our
installation service department will install the machine or transfer it to another place.
Only the maintenance work on items described in this manual should be performed by
the customer. Please read the instruction manual carefully before maintenance work.
Do not perform any maintenance work on items that are not described in this manual.
Otherwise, not only breakdown of the machine but also personal injury may result.
When an alert label has deteriorated and become illegible, contact our service
department.
0706-002
Safety Precautions
Safe-7
AJK-MLT-ID
Notes on Maintenance
Only a well-trained service person should perform maintenance work carefully
through for the machine in compliance with the instructions.
Before maintenance work, set the power breaker of the machine (GXH series)
to "OFF" and lock it with the padlock.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its substitute.
Residual voltages may remain behind for a few minutes in the internal devices
of the machine after power interception.
Before performing any maintenance work, be sure to wait for more than 10 minutes
until the DC power lamp and the charge lamp of the servoamplier turn "OFF" after
the power breaker of the machine (GXH series) is set to "OFF".
0706-002
Safety Precautions
Safe-8
AJK-MLT-ID
3. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in
the instruction manual.
Alert Indications described as " WARNING "
Alert Description Related Items
There are strong motorized and high-voltage areas inside the
machine. Special caution should be paid not to touch them.
Doing otherwise will cause personal injury (serious accident).
·
Onlyqualied
maintenancepersonnelshoulddetachthe
covers.
·
The machine should be operated with the covers being
attached.
·
If a cover is detached, be sure to reattach it.
·
Be sure to close the magazine door before operating the
machine.
·
Do not disengage the interlock of the magazine door.
"3." in "Chapter 1"
Do not bring the tray magnet close to the area where a
pacemaker is implanted. Otherwise, the pacemaker may be
affected by the magnetism and a serious accident will result.
"3." in
"Chapter 1"
Do not bring the tray magnet close to the area where a
pacemaker is implanted. Otherwise, the pacemaker may be
inuencedby
electromagneticimpulsesofthemagnet,causing
the wearer to faint, etc.
"3.6" in
"Chapter 1"
Onlyqualied
personnelshouldperformthemaintenance
workcarefullyforthemachineincompliancewiththespecied
instructions.
"1.1" in
"Chapter 4"
Before performing any maintenance work, be sure to lock the
power breaker and the air source with padlocks.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its
substitute.
"1.1" in
"Chapter 4"
0706-002
WARNING