OM-1273-004_w.pdf - 第99页
2-33 AJK-ML T-ID (6) Move the object pickup position of T ray #3 for the manual alignment operation with the image movement buttons until it is located at the center of the crosshair . (7) Press the button in the recogni…
2-32
AJK-MLT-ID
(4) When the [Teach Start] button is pressed, the "Manual Alignment
Operation Guide" window appears.
Fig. B25 "Manual Alignment Operation Guide" Window
(5) When the [Mnl Align] button is pressed, a recognition window
appears, making it possible to perform the manual alignment
operation.
Image Movement
Buttons
Fig. B26 Recognition Window
Note
When an image of the object for the manual alignment cannot be captured
by the camera, press the button in the recognition window. The "Manual
Alignment Operation Guide" window resumes. Perform a beam movement
operation for the adjustment.
0806-001
3.4 Teaching Operation
2-33
AJK-MLT-ID
(6) Move the object pickup position of Tray #3 for the manual
alignment operation with the image movement buttons until it is
located at the center of the crosshair.
(7) Press the
button in the recognition window to determine the
position.
The recognition window closes and the "T
each Standard Tray Pos"
window resumes.
(8)
The results of the teaching operation appear in the text boxes
entitled "Adj" in the "Teach Standard Tray Pos" window.
(9)
Whenthe[End]buttonispressed,the"ConrmationtoSaving"
dialog box opens, asking you to answer if the data should be saved
or not.
When
the[Yes]buttonispressed,thedataisreectedonthe
component library data is written over the previous one.
Pressing the [No] button cancels the data save operation.
0806-001
3.4 Teaching Operation
2-34
AJK-MLT-ID
0806-001
3.4 Teaching Operation
3.4.3 "Teach Pick-Up Pos" Window
This window can be used to perform a teaching operation to determine the
feeder (B) offset for the tray components.
When the [Teach Pick-Up Pos] button is pressed in the "Pick-Up Location"
window, the "Teach Pick-Up Pos" window appears.
[5]
[1]
[4]
[6]
[3][7] [2]
Fig. B27 "Teach Pick-Up Pos" Window
[1] Head Selection Buttons
Each head in the graphic image of the machine is provided with a
button function.
The installed multi-layer tray feeders are displayed, making it possible
for the operator to select one of the feeders.
[2]
Feeder (B) Offset
Displayed are the current values that indicate the pickup position. After
a teaching operation is performed, the results appear in the text boxes
entitled "Adj".
Cur :
Values before Teaching Operation
Adj :
Results of Teaching Operation