OM-1273-004_w.pdf - 第30页
Contents Cont-1 Page AJK-ML T-ID 0706-002 Before Use ............................................................................................ 1 About the Instruction Manual ...........................................…
Safety Precautions
Safe-18
AJK-MLT-ID
l
Ensure that the selected place is free of electric noise, etc.
Precautionary measures (prevention of noise generation, etc.,) must be taken for other
equipment to prevent the machine from malfunctioning.
l
Do not expose the machine to combustible or corrosive gas.
l
Select a place free of lamp soot and dust.
l
Level the machine at the correct height, using a level vial.
l
The machine should be free of obstacles around it for easy maintenance.
Power Supply
Conrm that the following power is supplied to the main machine (GXH Series).
•
Voltage
: 200±20 V AC, 3-Phase
•
Apparent Power :
GXH-1, 1S, 3 : Approx. 12.5 kVA
GXH-1J, 1JS, 3J : Approx. 1
1.5 kVA
Fluctuating voltage and noise in the power line can have not only a bad inuence on the
machine but also trigger a malfunction of the machine, causing an accident.
Take necessary measures to prevent the other equipment from generating noises.
Air Supply
Supply dry and clean air (Pressure: 0.45 to 0.69 MPa (4.6 to 7 kgf/cm
2
)) that does not
contain moisture, oil, and dust to the main machine (GXH Series).
When the supplied air contains much moisture, etc., the machine may not work normally
due to the moisture, etc., accumulated in the machine.
0804-003
Contents
Cont-1
Page
AJK-MLT-ID
0706-002
Before Use ............................................................................................ 1
About the Instruction Manual ................................................................ 2
Caution and Warning ............................................................................ 5
Limited Warranty ............................................................................ 5
Installation/Transfer and After-Sale Service ................................... 7
Requirements and Orientation/Training for Operators ................... 7
AboutSpecicationChange ........................................................... 8
About Disposal of Machine ............................................................ 8
Other Precautionary Items ............................................................. 8
Safety Precautions
1. About Safety Precaution Labels ..................................................... Safe- 1
2. Common Precautionary Items ........................................................ Safe- 3
Basic Precautions .......................................................................... Safe- 3
Precautions before Use .................................................................. Safe- 4
Notes on Machine Operations ........................................................ Safe- 5
Notes on Installation, Transfer and Maintenance ........................... Safe- 6
Notes on Maintenance ...................................................................
Safe- 7
3. Alert Indications in Instruction Manual ........................................... Safe- 8
Alert Indications described as "WARNING" ................................... Safe- 8
Alert Indications described as "CAUTION"..................................... Safe-10
4. Alert Labels .................................................................................... Safe-11
Location of Alert Labels .................................................................. Safe-11
Alert Labels and Description .......................................................... Safe-14
5. Precautionary Items for Correct Operations ................................... Safe-16
Requirements for Installation ......................................................... Safe-16
Precautionary Measures before Installation ................................... Safe-17
Power Supply ................................................................................. Safe-18
Air Supply ....................................................................................... Safe-18
Contents ............................................................................................... Cont-
1
Contents
Cont-2
Page
AJK-MLT-ID
0706-002
Chapter 1 Scope
1. Outline ............................................................................................ 1- 1
1.1 What is Multi-Layer Tray Feeder? ........................................... 1- 1
1.2 Specications .......................................................................... 1- 1
1.3 Standard Accessory Parts List ................................................ 1- 6
2. Various Functions and Outline of Actions ....................................... 1- 7
2.1 Various Functions ................................................................... 1- 7
2.2 Outline of Actions .................................................................... 1- 9
3. Name of Each Section and Handling ............................................. 1- 10
3.1 Layout of Main Machine .......................................................... 1- 12
3.2 Elevator ................................................................................... 1- 13
3.3 Magazines .............................................................................. 1- 15
3.3.1 Notes on Magazine Handling ........................................ 1- 16
3.3.2 Attachment of Pallets ..................................................... 1- 16
3.3.3 Detachment of Pallets ................................................... 1- 16
3.3.4 Replacement of Magazine ............................................. 1- 17
3.4 Traverse .................................................................................. 1- 20
3.5 Pallets ..................................................................................... 1- 21
3.6 Tray Magnets .......................................................................... 1- 24
Chapter 2 Operation
1. Basic Knowledge ............................................................................ 2- 1
1.1 Basic Operations .................................................................... 2- 1
2. Menus for Automatic Operation ...................................................... 2- 2
2.1 Outline of Menus for Automatic Operation .............................. 2- 2
2.2 Component Reloading ............................................................ 2- 3
2.2.1 Pickup Tray Matrix ......................................................... 2- 5
2.2.2 Tray Component Data ................................................... 2- 8
2.3 Operation ................................................................................ 2- 9
2.3.1 Alternate Mode .............................................................. 2- 10
2.3.2 Operation Mode ............................................................. 2- 11
2.3.3 Test Mode ...................................................................... 2- 12
2.4 Production Data ...................................................................... 2- 13
2.4.1 Feeder (B) Offset ........................................................... 2- 14
2.4.2 Component Carriage Data Editing ................................. 2- 15