00196378-0102_UM X-Feeder_EN.pdf - 第20页
Overview of X Feeder Modules Functions and Operating Controls Structure of the SIPLACE X-Seri es Tape Feed er Modules 20 User Manual X Feeder Modules SIPLACE Family 8 mm X tape feeder module - front vie w Legend (1) Lock…
Overview of X Feeder Modules
Structure of the SIPLACE X-Series Tape Feeder Modules Functions and Operating Controls
User Manual X Feeder Modules SIPLACE Family 19
3 Overview of X Feeder Modules
3.1 Functions and Operating Controls
3.1.1 Structure of the SIPLACE X-Series Tape Feeder Modules
3.1.1.1 Structure of the 2x8 mm Tape Feeder Modules
The following figure shows the structure of the 2x8 mm tape feeder module for the X series.
2x8 mm X tape feeder module
Legend
3.1.1.2 Structure of the 8 - 88 mm Tape Feeder Modules
The two following diagrams show the structure of the tape feeder module for the X-series by means of
the 8 mm X tape feeder module.
(1) Locking roll for fixing the feeder mod-
ule on the component table
(2) EDIF (energy and data interface)
(3) Front centering pin (4) Lever for raising the pickup window in
order to thread in and remove the
component tape
(5) Pickup window (6) Exit from the empty tape duct
(7) Foil rocker (8) Tape disposal rolls
(9) Rear centering pin (10) Operator panel
(11) Status display (12) Removal flap to the foil container
(13) Type plate
Overview of X Feeder Modules
Functions and Operating Controls Structure of the SIPLACE X-Series Tape Feeder Modules
20 User Manual X Feeder Modules SIPLACE Family
8 mm X tape feeder module - front view
Legend
(1) Locking roll for fixing the feeder mod-
ule on the component table
(2) EDIF (energy and data interface)
(3) Front centering pin (4) Lever for raising the pickup window in
order to thread in and remove the
component tape
(5) Pickup window (6) Exit from the empty tape duct
(7) Setting of the foil tension (8) Foil rocker
(9) Tape disposal rolls (10) Rear centering pin
(11) Type plate
Overview of X Feeder Modules
Structure of the SIPLACE X-Series Tape Feeder Modules Functions and Operating Controls
User Manual X Feeder Modules SIPLACE Family 21
8 mm X tape feeder module - rear view
Legend
(1) Entry to the empty tape duct with tape
spring
(2) Removal flap to the foil container
(3) Integrated blade for cutting off the
cover foil
(4) Removal handle, engaged
(5) Operator panel (6) Drive motor for foil removal
(7) Drive motors for the tape conveyor (8) Rotary valve for removing compo-
nents
(9) Front sliding guide (10) Rear sliding guide
(11) Graphical representation of the pick-
up position in relation to the compo-
nent size