00196378-0102_UM X-Feeder_EN.pdf - 第9页

Introduction Contents and Filing of this Manual Important Notes about this Manual User Manual X Feeder M odules SIPLACE Family 9 1.2 Important Notes about this Manual 1.2.1 Contents and Fi ling of this Manual This manua …

Introduction

Module Description Environmentally-Friendly Disposal of Materials and Components

8 User Manual X Feeder Modules SIPLACE Family

1.1.5 Environmentally-Friendly Disposal of Materials and Components

SIPLACE products are manufactured using only materials and parts that can be easily separated and

disposed of in an environmentally-friendly way. Hazardous materials are not necessary for the installa-

tion, dismantling or operation of the machine.

1.1.6 Electromagnetic Compatibility (EMC)

All SIPLACE products are designed and tested for professional use in industrial applications. Electro-

magnetic compatibility in terms of the emission of interference cannot be guaranteed in any other envi-

ronment.

1.1.7 Use of Original SIPLACE Accessories and Spare Parts

Only use original spare parts and authorized accessories. The use of other parts will affect safety and

will invalidate the liability for any consequential damage.

NOTICE

The company operating the system has sole responsibility for the proper, environmentally-

friendly disposal of machines, working materials, consumables and wear parts.

►Please observe your national statutory provisions for waste disposal and environmental pro-

tection.

Introduction

Contents and Filing of this Manual Important Notes about this Manual

User Manual X Feeder Modules SIPLACE Family 9

1.2 Important Notes about this Manual

1.2.1 Contents and Filing of this Manual

This manual contains basic notes on assembly, operation and maintenance of the module. The service

engineers, qualified staff, operators and users must therefore read it before commencing installation and

commissioning. Make sure that the manual is always available wherever the module is operated.

1.2.2 Danger Notes

1.2.3 Liability of the Manufacturer/Supplier

We draw your attention to the fact that these instructions only contain descriptive and explanatory ma-

terial and do not include any contractual conditions or undertakings. All obligations of SIPLACE proceed

from the conclusion of the contract concerned, under which you have the machine described herein. This

applies in particular to all statements regarding performance or service life and the agreed liability for

faults or defects. The provisions of the contract regarding the liability for faults or defect are neither ex-

tended nor restricted by any statements in this manual.

1.2.4 Release History

1.2.5 Further Information

If you have any questions about this manual or if you would like more information about certain subjects,

please contact your local branch or us directly:

ASM Assembly Systems GmbH & Co. KG

Rupert-Mayer-Strasse 44

81379 München, Germany

Tel.: +49 (89) 20800 – 27819

Fax: +49 (89) 20800 – 36692

WARNING

A thorough knowledge of the relevant part of this User Manual is required before carrying out

any work on the machine.

All work must be carried out by appropriately trained and qualified personnel.

All warning, caution and danger notes MUST be observed.

►Carefully read through the chapter on operational safety in the operating manual for this pur-

pose.

Edition Description

10/2009 First edition

Introduction

Important Notes about this Manual SIPLACE on the World Wide Web (WWW)

10 User Manual X Feeder Modules SIPLACE Family

1.2.6 SIPLACE on the World Wide Web (WWW)

Log into our SIPLACE® homepage at http://www.siplace.com.

►You can choose between the German and English versions.

The different sections contain information about our products, services and contact persons.

In addition, registered customers can access the

SIPLACE User Group

. Here you can call up special

information about our placement systems e.g.

▪ Technical documentation,

▪ Technical information,

▪ Spare parts lists etc.

Registration for the user group is very simple:

►Click on the Register link.

►Fill in the registration form and send it off to us.

Soon afterwards, you will receive your access authorization with USER ID and password.

1.2.7 Abbreviations

EDIF Energy and data interface

LCD

LC display

Liquid Crystal Display