00196378-0102_UM X-Feeder_EN.pdf - 第5页
Contents User Manual X Feeder Modules SIPLACE Family 5 5 Messages 79 5.1 Messages for 2x8 mm Feeder Modules 79 5.1.1 Module Error: Error Messages Conc erning the Control Unit of the Feeder Module 79 5.1.2 Track and Proce…
Contents
4 User Manual X Feeder Modules SIPLACE Family
3.2 Technical Data 32
3.3 Track Usage in the Component Table 33
3.4 Tape Material 34
3.5 Overview of Types 35
3.5.1 8 mm X 35
3.5.2 2x8mmX 36
3.5.3 12mmX 37
3.5.4 16mmX 38
3.5.5 24mmX 39
3.5.6 32mmX 40
3.5.7 44mmX 41
3.5.8 56mmX 42
3.5.9 72mmX 43
3.5.10 88mmX 44
4 Operating Tape Feeder Modules 45
4.1 Inserting the Feeder Module into the Component Table 45
4.2 Setting Up the Feeder Module 47
4.2.1 Inserting / Removing the Spacer (Tape Support) 47
4.2.1.1 Spacer on 2x8 mm Feeder Modules 47
4.2.1.2 Spacer on 8 mm Feeder Modules 49
4.2.2 Adjusting the Foil Removal Force on 2x8 mm Feeder Modules 51
4.2.3 Preparing the Tape Reel 52
4.2.4 Inserting the Tape 53
4.2.4.1 Inserting the Tape on 2x8 mm Feeder Modules 53
4.2.4.2 Inserting the Tape on 8 - 88 mm Feeder Modules 54
4.2.5 Inserting the Cover Foil 56
4.2.5.1 Inserting the Cover Foil on 2x8 mm Feeder Modules 56
4.2.5.2 Inserting the Cover Foil on 8 - 88 mm Feeder Modules 57
4.2.6 Retooling to PSA Foil (Pressure Sensitive Adhesive) 57
4.2.6.1 PSA Foil on 8 - 16 mm Feeder Modules 57
4.2.6.2 PSA Foil on 16 - 88 mm Feeder Modules 58
4.2.7 Removing the Tape 59
4.2.7.1 Removing the Tape on 2x8 mm Feeder Modules 59
4.2.7.2 Removing the Tape on 8 -88 mm Feeder Modules 61
4.3 Using the Operator Panel 62
4.3.1 Overview of the Operator Panels 62
4.3.1.1 Overview of the Operator Panel for 2x8 mm Feeder Modules 62
4.3.1.2 Overview of the Operator Panel for 8 - 88 mm Feeder Modules 63
4.3.2 Adjusting the Pickup Positions 63
4.3.2.1 Pick-Up Positions for 2x8 mm Feeder Modules 63
4.3.2.2 Pick-Up Positions for 8 mm X Feeder Modules 66
4.3.2.3 Pick-Up Positions for 12 mm X Feeder Modules 68
4.3.2.4 Pick-Up Positions for 16 - 88 mm X Feeder Modules 70
4.3.3 Setting the Pitch 71
4.3.3.1 Setting the Pitch on 2x8 mm Feeder Modules 72
4.3.3.2 Setting the Pitch on 8 - 88 mm Feeder Modules 72
4.3.4 Setting the Conveyor Speed for 8 - 88 mm Feeder Modules 73
4.3.5 Setting the Language for 8 - 88 mm Feeder Modules 73
4.4 Removing the Feeder Module from the Component Table 74
4.5 Regular Maintenance 76
4.5.1 Regular Maintenance on 2x8 mm Feeder Modules 76
4.5.2 Regular Maintenance on 8 - 88 mm Feeder Modules 77
Contents
User Manual X Feeder Modules SIPLACE Family 5
5 Messages 79
5.1 Messages for 2x8 mm Feeder Modules 79
5.1.1 Module Error: Error Messages Concerning the Control Unit of the Feeder Module 79
5.1.2 Track and Process Error: Error Messages Concerning One or Both Feeder Module
Tracks
81
5.1.3 Flow Chart: Error Display on the Operator Panel 83
5.2 Messages for 8 - 88 mm Feeder Modules 84
5.2.1 Messages Sent by the Feeder Module 84
5.2.1.1 Introduction 84
5.2.1.2 No Display 84
5.2.1.3 Initialization 84
5.2.1.4 Reference o 84
5.2.1.5 Software Reset 84
5.2.1.6 Handle 85
5.2.1.7 Logging Off 85
5.2.1.8 Waiting for Log Off 85
5.2.1.9 Voltage Too Low 1 85
5.2.1.10 Voltage Too Low 2 85
5.2.1.11 Feed Error 1 86
5.2.1.12 Feed Error 2 86
5.2.1.13 Feed Time Exceeded 86
5.2.1.14 Torn Foil 86
5.2.1.15 Foil Stripper 86
5.2.1.16 Foil Jam 87
5.2.1.17 Remove the Foil 87
5.2.1.18 CAN Bus Error 87
5.2.1.19 Boot Error 87
5.2.1.20 Data Flash Error 87
5.2.1.21 Download Boot 88
5.2.1.22 Update Boot 88
5.2.1.23 New Parameters 88
5.2.1.24 EEPROM Read Error 88
5.2.1.25 EEPROM Write Error 88
5.2.1.26 EEPROM Data Error 89
5.2.1.27 Scan Request 89
5.2.2 Messages From Process 89
5.2.2.1 Introduction 89
5.2.2.2 Not Verified 89
5.2.2.3 Scan Barcode 89
5.2.2.4 Scan OK 90
5.2.2.5 Scan Error 90
5.2.2.6 Fill level Too Low 90
5.2.2.7 Splice Sensor 90
5.2.2.8 Vision Error 90
5.2.2.9 Pickup Error 91
5.2.2.10 Target Directory Full 91
5.2.2.11 External Deactivation 91
5.2.2.12 Refill 91
5.2.2.13 Wrong Type 91
5.2.2.14 Location Error 92
5.2.2.15 Foil Tension 92
Contents
6 User Manual X Feeder Modules SIPLACE Family
6 Accessories 93
6.1 Linear Dipping Unit X (LDU X) 93
6.2 Feeder Module Adapter for the X Series 94
6.2.1 Feeder Module Adapter for the X Series with Label Presenter 94
6.2.2 Feeder Module Adapter for the X Series with vibration feeder 95
6.2.3 Feeder Module Adapter for the X Series with Reject Conveyor Module 95
6.3 Energy and Data Interface (Single Slot EDIF) for X Feeder Modules 96
6.3.1 Description 96
6.3.2 Usage 96
6.3.3 Scope of Delivery 96
6.4 Tape Splicing Tool for SMD Tape Connections 97
6.4.1 Area of Use 97
6.4.2 Safety Instructions 98
6.4.3 Tools Required 98
6.4.4 Consumable Materials Required 98
6.4.5 Preparation 99
6.4.6 Connecting the Tapes 99
6.4.6.1 Splicing Time 99
6.4.6.2 Joining Tapes 100
6.4.6.3 Checking the Join: Examples of Incorrect Connections 104
6.4.6.4 Examples of Correct Splice Connections 105
6.4.7 Accessories for the Accessories 106