00196378-0102_UM X-Feeder_EN.pdf - 第35页
Overview of X Feeder Modules 8 mm X Overview of Types User Manual X Feeder M odules SIPLACE Family 35 3.5 Overview of Types 3.5.1 8 mm X Tape feeder modul e 8 mm X Item no.: 00141270-xx Item no. for the feeder mo dule wi…
Overview of X Feeder Modules
Tape Material Software Versions
34 User Manual X Feeder Modules SIPLACE Family
3.4 Tape Material
Tape widths range from 8 mm to 88 mm. The tape material is blister or paper.
Component tapes with a permanently adhesive cover foil (PSA foil) can also be processed. This will
require the "PSA Kit" option. (Not valid for 2x8 mm tape feeder modules.)
* On modules with 16 - 88 mm from version -06 onward the PSA kit is installed as default.
The design of the tape feeder modules was based on the following tape standards:
▪ DIN EN 60286-3 (12/1998) / IEC 60286-3 (12/1997)
▪ JIS C 0806-3 (1999)
▪ ANSI/EIA 481-C (10/2003)
The overall height of the blister tapes depends on the tape width, and must not exceed the following
maximum values:
For 8 mm paper tapes, the paper thickness must not exceed 1.6 mm. The length of a component pocket
in the direction of travel must not exceed 51 mm.
Tape reel diameter
The tape reel diameter may be up to 19" (483 mm) for all feeder modules.
Depending on the PCB transport height the following max. diameters are allowed for the tape reels:
PSA Kit Item No.
PSA Kit 8 mm X 00141224-xx
PSA Kit 12 mm X 00141225-xx
PSA Kit 16 mm X * 00141227-xx
Tape width Overall height of the blister tapes
8mm Max. 3.5 mm
12 mm Max. 6.4 mm
16 mm and wider max. 25 mm
Without support for the additional tape reel With support for the additional tape reel
PCB conveyor height of
the component trolley
Tape reel diameter Tape reel diameter
without insertable shaft with insertable shaft
830 mm 17" 15" < 15"
900 mm 19" 17" 15"
930 mm 19" 19" 17"
950 mm 19" 19" 19"
Overview of X Feeder Modules
8 mm X Overview of Types
User Manual X Feeder Modules SIPLACE Family 35
3.5 Overview of Types
3.5.1 8 mm X
Tape feeder module 8 mm X
Item no.: 00141270-xx
Item no. for the feeder module with splice sensor: 00141290-xx
Width: 10.8 mm
Used locations at the component table: 1
Conveyor pitch: 1, 2, 4, 8 mm
Changeover time for the component tape: < 45 s
Changeover time for the offline setup feeder mod-
ule on the machine:
< 15 s
Overview of X Feeder Modules
Overview of Types 2x8 mm X
36 User Manual X Feeder Modules SIPLACE Family
3.5.2 2x8 mm X
Tape feeder module 2x8 mm X
Item no.: 00141269-xx
Item no. for the feeder module with splice sensor: 00141289-xx
Width: 22.6 mm
Used locations at the component table: 2
Conveyor pitch: 1, 2, 4, 8 mm
Changeover time for one component tape each: < 45 s
Changeover time for the offline setup feeder mod-
ule on the machine:
< 8 s