00196378-0102_UM X-Feeder_EN.pdf - 第69页
Operating Tape Feeder Modules Adjusting the Pickup Positions Using the Operator Panel User Manual X Feeder M odules SIPLACE Family 69 Setting the Pickup position ► (1) The display shows the start screen ("Track"…
Operating Tape Feeder Modules
Using the Operator Panel Adjusting the Pickup Positions
68 User Manual X Feeder Modules SIPLACE Family
4.3.2.3 Pick-Up Positions for 12 mm X Feeder Modules
Three different pickup positions can be set for 12 mm X feeder modules.
Pickup positions for 12 mm X feeder modules
Legend
▪ Pickup position 1:
here, components with a width of (W) ≤ 3 mm are picked.
▪ Pickup position 2:
here, components with a width of (W) >3 mm and ≤ 7 mm are picked.
▪ Pickup position 3:
here, components with a width of (W) >7 mm and ≤ 11.5 mm are picked.
A Direction of tape movement W Width of the components
B Foil removal edge 1-3 Numbers of the pickup positions
Operating Tape Feeder Modules
Adjusting the Pickup Positions Using the Operator Panel
User Manual X Feeder Modules SIPLACE Family 69
Setting the Pickup position
►(1) The display shows the start screen ("Track").
Press the Set button until the display shows
"Pick-Pos."
► (2) Press the Forwards button.
The tape is moved forwards in 2 mm steps. Press the
key several times, until the component center has
reached the pickup position.
►(3) Repeatedly press the Set button to return to the
start screen.
The setting is retained automatically.
NOTICE
The feeder will also return to the start screen, if no button is pressed for 1 minute.
Operating Tape Feeder Modules
Using the Operator Panel Adjusting the Pickup Positions
70 User Manual X Feeder Modules SIPLACE Family
4.3.2.4 Pick-Up Positions for 16 - 88 mm X Feeder Modules
There is only one pickup position for 16 - 88 mm feeder modules. The tape material must be inserted or
set in such a way, that the center of the components to be processed is positioned in the center of the
pickup position.
Pickup position for 16 - 88 mm X feeder modules
Legend
Setting the Pickup position
►(1) Pickup position
►(2) The display shows the start screen ("Track")
.Press the Set button until the display shows "Pickup pos."
►(3) Press the Forwards button.
The tape is moved forwards in 2 mm steps. Press the key several times, until the component center
has reached the pickup position.
Repeatedly press the Set button to return to the start screen.
The setting is retained automatically.
A Direction of tape movement W Width of the components
B Foil removal edge
NOTICE
The feeder will also return to the start screen, if no button is pressed for 1 minute.