00196378-0102_UM X-Feeder_EN.pdf - 第33页
Overview of X Feeder Modules Software Versions Track Usage in the Component Table User Manual X Feeder M odules SIPLACE Family 33 The following is valid for all feeder module types: 3.3 Track Usage in the Component Table…
Overview of X Feeder Modules
Technical Data Software Versions
32 User Manual X Feeder Modules SIPLACE Family
3.2 Technical Data
X feeder module Item No. Width of the
feeder module
Conveyor
pitches
Max. overall height of the
tape material
8 mm X 00141270-xx
00141290-xx *
10.8 mm 1, 2, 4, 8 mm 1.6 mm paper
3.5 mm blister
2x8 mm X 00141269-xx
00141289-xx *
22.6 mm 1, 2, 4, 8 mm 1.6 mm paper
3.5 mm blister
12 mm X 00141271
00141291-xx *
22.6 mm 4 – 16 mm ** 6.5 mm blister
16 mm X 00141272-xx
00141292-xx *
34.4 mm 4 – 20 mm ** 25 mm blister
24 mm X 00141273-xx
00141293-xx *
34.4 mm 4 – 32 mm ** 25 mm blister
32 mm X 00141274-xx
00141294-xx *
42.6 mm 4 – 40 mm ** 25 mm blister
44 mm X 00141275-xx
00141295-xx *
58.0 mm 4 – 52 mm ** 25 mm blister
56 mm X 00141276-xx
00141296-xx *
69.8 mm 4 – 64 mm ** 25 mm blister
72 mm X 00141277-xx
00141297-xx *
81.6 mm 4 – 80 mm ** 25 mm blister
88 mm X 00141278-xx
00141298-xx *
105.2 mm 4 – 96 mm ** 25 mm blister
* Item no. for the feeder module with splice sensor ** Adjustable in 4 mm steps
Overview of X Feeder Modules
Software Versions Track Usage in the Component Table
User Manual X Feeder Modules SIPLACE Family 33
The following is valid for all feeder module types:
3.3 Track Usage in the Component Table
The following figure shows how many tracks the different X feeder modules are using in the component
table.
Length of the feeder modules: approx. 587 mm
Height of the feeder modules: approx. 200 mm
Max. height of edges protruding over the top edge of the tape pock-
et:
<= 3 mm
Changeover time for the component tape: < 45 s
Changeover time for the pre-set feeder module on the placement
machine:
< 15 s
NOTICE
Since the feeder modules do not have any raised flaps and are firmly anchored to the compo-
nent table, the risk of a head crash is minimized.
Legend
1. Track number
2. Tape widths
3. Width of the feeder modules
4. Direction of the feeder module in the component table
Overview of X Feeder Modules
Tape Material Software Versions
34 User Manual X Feeder Modules SIPLACE Family
3.4 Tape Material
Tape widths range from 8 mm to 88 mm. The tape material is blister or paper.
Component tapes with a permanently adhesive cover foil (PSA foil) can also be processed. This will
require the "PSA Kit" option. (Not valid for 2x8 mm tape feeder modules.)
* On modules with 16 - 88 mm from version -06 onward the PSA kit is installed as default.
The design of the tape feeder modules was based on the following tape standards:
▪ DIN EN 60286-3 (12/1998) / IEC 60286-3 (12/1997)
▪ JIS C 0806-3 (1999)
▪ ANSI/EIA 481-C (10/2003)
The overall height of the blister tapes depends on the tape width, and must not exceed the following
maximum values:
For 8 mm paper tapes, the paper thickness must not exceed 1.6 mm. The length of a component pocket
in the direction of travel must not exceed 51 mm.
Tape reel diameter
The tape reel diameter may be up to 19" (483 mm) for all feeder modules.
Depending on the PCB transport height the following max. diameters are allowed for the tape reels:
PSA Kit Item No.
PSA Kit 8 mm X 00141224-xx
PSA Kit 12 mm X 00141225-xx
PSA Kit 16 mm X * 00141227-xx
Tape width Overall height of the blister tapes
8mm Max. 3.5 mm
12 mm Max. 6.4 mm
16 mm and wider max. 25 mm
Without support for the additional tape reel With support for the additional tape reel
PCB conveyor height of
the component trolley
Tape reel diameter Tape reel diameter
without insertable shaft with insertable shaft
830 mm 17" 15" < 15"
900 mm 19" 17" 15"
930 mm 19" 19" 17"
950 mm 19" 19" 19"