00196378-0102_UM X-Feeder_EN.pdf - 第56页
Operating Tape Feeder Modules Setting Up the Feeder Modu le Inserting the Cover Foil 56 User Manual X Feeder Modules SIPLACE Family 4.2.5 Inserting the Cover Foil 4.2.5.1 Inserting the Cover Foil on 2x8 mm Feeder Modules…
Operating Tape Feeder Modules
Inserting the Tape Setting Up the Feeder Module
User Manual X Feeder Modules SIPLACE Family 55
►(5) Direct the excess cover foil past the side of the pickup window.
►(6) Direct the excess cover foil past the tape lift and around the pickup window.
►(7) Press and re-press the Backwards button until the cover foil reaches the foil removal edge and
the first component is at the correct pickup position.
►(8) Press the lever backwards.
Operating Tape Feeder Modules
Setting Up the Feeder Module Inserting the Cover Foil
56 User Manual X Feeder Modules SIPLACE Family
4.2.5 Inserting the Cover Foil
4.2.5.1 Inserting the Cover Foil on 2x8 mm Feeder Modules
► (1) Press the pickup window up and pull the cover foil
out through the middle of the pickup window.
Fold the cover foil at the removal edge over back-
wards.
Release the rocker again. This fixes the tape in the
sprocket wheel.
►(2) Press the foil removal rocker open and thread the
cover foil between the wheels. Release the rocker
again.
►(3) Press the Foil button for the active track. The foil
removal will begin once the foil rocker has reached
the top end position.
►(4) The foil is inserted as long as the Foil button is
pressed. Make sure that the foil is run accurately over
the foil rocker. The insertion will be automatically
stopped once the foil rocker has reached the switch-
off position. Always press the Foil button until the
feeder module stops the foil removal on its own.
Operating Tape Feeder Modules
Retooling to PSA Foil (Pressure Sensitive Adhesive) Setting Up the Feeder Module
User Manual X Feeder Modules SIPLACE Family 57
4.2.5.2 Inserting the Cover Foil on 8 - 88 mm Feeder Modules
►(1) Take the cover foil between thumb and index finger.
►(2) Insert the cover foil into the foil removal slot.
►(3) Press the Foil button and keep it pressed.
►(4) The cover foil is inserted into the foil container. The insertion stops automatically when the cover
foil is tensioned.
4.2.6 Retooling to PSA Foil (Pressure Sensitive Adhesive)
4.2.6.1 PSA Foil on 8 - 16 mm Feeder Modules
For the modules 8 and 12 mm as well as 16 mm up to functional status -05 the option "PSA-Kit" will be
needed (see Chapter "3.4 Tape Material" [ ➙ 34]). Installation and handling are described in "Assembly
Instructions PSA Kit for Tape Feeder Modules X 8-16 mm" [00194721-xx].