00197295-01_UM_D4i_SR605_EN.pdf - 第130页
3 Technical data for the machine User manual SIPLACE D4i 3.9 Feeder modules From software version SR.605.03 SP2 10/2012 EN edition 130 3.9.13 Surf t ape feeder module 3.9.13.1 Overview For placing bare dies, you will nee…
User manual SIPLACE D4i 3 Technical data for the machine
From software version SR.605.03 SP2 10/2012 EN edition 3.9 Feeder modules
129
3.9.12 Bulk case feeder module
3
Fig. 3.9 - 7 Bulk case feeder module
3
Item no. 00142318-xx
Width 30.6 mm
Tracks per feeder module 2
Feeder module locations filled 1
Max. number of feeder mod. per machine 4 x 12
Stock of components up to 50,000
Feeding rails 0402/0.5 mm height item no. 00142320-xx
0603/0.80 mm height item no. 00142322-xx
Cycle time < 60 ms
The compressed air supply for bulk case feeder modules is described in Section 3.10.6
, page 137.
3 Technical data for the machine User manual SIPLACE D4i
3.9 Feeder modules From software version SR.605.03 SP2 10/2012 EN edition
130
3.9.13 Surf tape feeder module
3.9.13.1 Overview
For placing bare dies, you will need the surf tape feeder module for feeding components. There
are versions of these feeder modules for 8 mm tapes and 12 or 16 mm tapes.
3
Fig. 3.9 - 8 Surf tape feeder module
Handling of the feeder module is described in the operating instructions for feeder modules.
User manual SIPLACE D4i 3 Technical data for the machine
From software version SR.605.03 SP2 10/2012 EN edition 3.9 Feeder modules
131
3.9.13.2 Technical data
3
3
3
3.9.13.3 Parameters for surf tape feeder modules
The parameters for the surf tape feeder module can be modified on the SIPLACE Pro computer.
Tape widths 8/12/16 mm
Recommended tape and component
sizes
8 mm: for 1 x 1 mm² - 2.3 x 2.3 mm² components
12 mm: for 2.3 x 2.3 mm² - 5 x 5 mm² components
16 mm: for 3.8 x 3.8 mm² - 9.5 x 9.5 mm² compo-
nents
Packaging accuracy of the bare die on
the surf tape
Bare die size up to 2.3 x 2.3 mm²: +/- 100 µm, 6
Bare die size over 2.3 x 2.3 mm²: +/- 200 µm, 6
(related to the center of the pocket)
Required distance between the edges of
the bare dies to the tape pocket Min. 0.4 mm
Pusher needle Single or triple needle depending on the die size
Tape material Metric
Tape standard IEC 286-3, DIN-IEC-286, EIA 481, and JIS C 0806
Tape reel diameter 7" to 15"
Footprint of the feeder module 1 location on the component table