00197295-01_UM_D4i_SR605_EN.pdf - 第140页
3 Technical data for the machine User manual SIPLACE D4i 3.10 Component trolley From software version SR.605.03 SP2 10/2012 EN edition 140 The second level reel ho lder can be in stalled on the c omponent trolley in tw o…
User manual SIPLACE D4i 3 Technical data for the machine
From software version SR.605.03 SP2 10/2012 EN edition 3.10 Component trolley
139
3.10.7 Second level reel holder
Item no. 00119772-xx Second level reel holder D4i
When using a maximum set-up of 3 x 8 mm feeder modules, the tape reels may be restrained in
the base container (item 4 in Fig. 3.10 - 6
) and impede the handling of the tape reels. The second
level reel holder (item 1 in Fig. 3.10 - 6
) allows to swap tape reels which are restrained in the base
container to the second level reel holder and thus to ease the handling. The elevated arrangement
of the second level reel holder improves the ergonomics when setting-up and refilling compo-
nents.
Fig. 3.10 - 6 Second level reel holder
(1) Second level reel holder
(2) Upper assembly position
(3) Lower assembly position
(4) Base container
3 Technical data for the machine User manual SIPLACE D4i
3.10 Component trolley From software version SR.605.03 SP2 10/2012 EN edition
140
The second level reel holder can be installed on the component trolley in two different height po-
sitions (item 4 in Fig. 3.10 - 6
, page 139). The maximum permitted reel size is seven inch.
When the component trolley height is set to 900 mm, the maximum reel diameter in the base con-
tainer can assume the following values depending on the assembly position:
3
The second level reel holder is half as wide as the component trolley. When ordering one reel hol-
der is delivered. It can be installed on the right or left component trolley side. If the full component
trolley width is to be used, you will need two second level reel holders.
Second level reel holder Max. reel diameter in the base container
Upper assembly position 13 inch
Lower assembly position 10 inch
User manual SIPLACE D4i 4 Setting up and commissioning
From software version SR.605.03 SP2 10/2012 EN edition 4.1 Transport and delivery configuration
141
4 Setting up and commissioning
4.1 Transport and delivery configuration
4.1.1 Shipping packaging
Within Europe, the machine and the CO trolleys are supplied on two pallets and wrapped in plastic
film. They will be dispatched overseas in two robust wooden crates.
4.1.1.1 Dimensions of the shipping packaging
4
4
4
Fig. 4.1 - 1 Transport crate - dimension in millimeters
(A) Fork-lift attachment points
Crate for the machine Crate for the component trolleys
Length 2600 mm 1705 mm
Width 2400 mm 1200 mm
Height 1840 mm 1300 mm