00197295-01_UM_D4i_SR605_EN.pdf - 第238页

6 Station extensions User manual SIPLACE D4i 6.10 01005 package From software version SR.605.03 SP2 10/2012 EN edition 238 6.10 01005 p ackage Item no. 001 19776-xx 01005 package for D4i/D2i/D1i The SIPLACE D4i m achine …

100%1 / 256
User manual SIPLACE D4i 6 Station extensions
From software version SR.605.03 SP2 10/2012 EN edition 6.9 C&P high-resolution CO camera, type 30, 27 x 27, digital
237
6.9 C&P high-resolution CO camera, type 30, 27 x 27, digital
Item no. 03085394-xx C&P component camera (type 30), digital
6.9.1 Structure
6
Fig. 6.9 - 1 C&P component camera, type 30, 27 x 27, digital
(1) Component camera lens and illumination
(2) Camera amplifier
(3) Illumination control
6.9.2 Technical data
6
Component dimensions 0.4 x 0.2 mm² to 18.7 x 18.7 mm²
Range of components 01005 to 27 x 27 mm²
flip-chip, bare die, PLCC44, BGA, µBGA, TSOP, QFP, SO
to SO32, DRAM
Min. lead pitch 0.3 mm
Min. lead width 0.15 mm
Min. ball pitch 0.25 mm
Min. ball diameter 0.14 mm
Field of vision 32 x 32 mm²
Method of illumination Front-illumination (5 levels, programable as required)
6 Station extensions User manual SIPLACE D4i
6.10 01005 package From software version SR.605.03 SP2 10/2012 EN edition
238
6.10 01005 package
Item no. 00119776-xx 01005 package for D4i/D2i/D1i
The SIPLACE D4i machine is already prepared to place 01005 components. In order to process
01005 components one simply needs upgrading of the 12-nozzle Collect&Place head. The retro-
fitting package contains the following parts:
– A type 12 sleeve complete, 270°-sub-division Item no. 03054107-xx, 3x
– Nozzle, type 905/3005 cpl. ceramic Item no. 03057320-xx, 12x
– Assembly instructions 01005 package for D4i/D2i/D1i
German and English Item no. 00195398-xx, 1x
6.11 0201 package
Item no. 00119775-xx 0201 package for C&P12, D series SST30
We can supply the 0201 package for processing 0201 components with the 12-nozzle
Collect&Place head.
This contains:
– C&P component camera (type 30), 27 x 27, digital Item no. 03085394-xx, 1x
– Component sensor for the 12-nozzle C&P head Item no. 00118021-xx, 1x
– Nozzle type 706/906 Vectra ceramic Item no. 00345031-xx, 12x
– Assembly kit CO camera SST28/29 DLM2 Item no. 03023819-xx, 1x
User manual SIPLACE D4i 6 Station extensions
From software version SR.605.03 SP2 10/2012 EN edition 6.12 Vacuum pump
239
6.12 Vacuum pump
Item no. 00119017-xx Vacuum pump, D4i/D2i/D1i
Item no. 00119406-xx Connection kit for vacuum pump, D4i
Every Collect&Place head has a separate vacuum generator that supplies the holding and place-
ment circuit with the vacuum that it needs. The vacuum generator works on the Venturi principle.
The machine's compressed air consumption is approximately 950 Nl/min, which means that the
compressed air supply must be dimensioned accordingly. If the owner does not have sufficient ca-
pacity locally, the associated investment costs would be high, so we supply a vacuum pump that
will provide the necessary vacuum.
Other advantages of using the vacuum pump are:
– It roughly halves the machine's compressed air consumption.
– It reduces the input pressure.
– The machine can be easily integrated into existing lines.
– The ongoing operating costs reduce according to the energy costs.
The vacuum pump is maintenance-free and 100% oil-free. It has sufficient capacity to supply the
holding circuits of the Collect&Place heads.
Compressed air consumption of the machine
a
a) Under normal atmospheric conditions at 20°C and 1013 hPa
Without vacuum pump 950 Nl/min
With vacuum pump 400 Nl/min