00197295-01_UM_D4i_SR605_EN.pdf - 第237页
User manual SIPLACE D4i 6 Station extensions From software version SR.605.03 SP2 10/2012 EN edition 6.9 C&P high-re solution CO camera, type 30, 27 x 27, digital 237 6.9 C&P high-resolution CO came ra, type 30, 2…
6 Station extensions User manual SIPLACE D4i
6.8 Component sensor for the C&P12 head From software version SR.605.03 SP2 10/2012 EN edition
236
PLEASE NOTE 6
If you are placing 0201 components with the 906 nozzle, it is essential to use the component sen-
sor since no vacuum measurements are possible. 6
Using the component sensor can improve the dpm rate even when placing other small compo-
nents, such as 0402 or 0603 components. When you select a component sensor from the pack-
age form list, remember that the component can only be placed on machines that are equipped
with that component sensor.
If you wish to test components with the component sensor, then it must be configured on the line.
The following alternatives are then available:
New set-up The set-up optimization automatically assigns the components to the
component sensor, if the sensor is installed.
Old set-up A new GF number is assigned to components to be checked with the
component sensor.
Central data management If not every machine on the line is equipped with the component sen-
sor, then a new package form number is assigned for every compo-
nent to be checked with the component sensor.
PLEASE NOTE 6
– The component sensor may only be retrofitted by ASM Assembly Systems GmbH & Co. KG
service engineers.
– Recalibrate the 12-nozzle C&P head with the SITEST program after installing the component
sensor.
User manual SIPLACE D4i 6 Station extensions
From software version SR.605.03 SP2 10/2012 EN edition 6.9 C&P high-resolution CO camera, type 30, 27 x 27, digital
237
6.9 C&P high-resolution CO camera, type 30, 27 x 27, digital
Item no. 03085394-xx C&P component camera (type 30), digital
6.9.1 Structure
6
Fig. 6.9 - 1 C&P component camera, type 30, 27 x 27, digital
(1) Component camera lens and illumination
(2) Camera amplifier
(3) Illumination control
6.9.2 Technical data
6
Component dimensions 0.4 x 0.2 mm² to 18.7 x 18.7 mm²
Range of components 01005 to 27 x 27 mm²
flip-chip, bare die, PLCC44, BGA, µBGA, TSOP, QFP, SO
to SO32, DRAM
Min. lead pitch 0.3 mm
Min. lead width 0.15 mm
Min. ball pitch 0.25 mm
Min. ball diameter 0.14 mm
Field of vision 32 x 32 mm²
Method of illumination Front-illumination (5 levels, programable as required)
6 Station extensions User manual SIPLACE D4i
6.10 01005 package From software version SR.605.03 SP2 10/2012 EN edition
238
6.10 01005 package
Item no. 00119776-xx 01005 package for D4i/D2i/D1i
The SIPLACE D4i machine is already prepared to place 01005 components. In order to process
01005 components one simply needs upgrading of the 12-nozzle Collect&Place head. The retro-
fitting package contains the following parts:
– A type 12 sleeve complete, 270°-sub-division Item no. 03054107-xx, 3x
– Nozzle, type 905/3005 cpl. ceramic Item no. 03057320-xx, 12x
– Assembly instructions 01005 package for D4i/D2i/D1i
German and English Item no. 00195398-xx, 1x
6.11 0201 package
Item no. 00119775-xx 0201 package for C&P12, D series SST30
We can supply the 0201 package for processing 0201 components with the 12-nozzle
Collect&Place head.
This contains:
– C&P component camera (type 30), 27 x 27, digital Item no. 03085394-xx, 1x
– Component sensor for the 12-nozzle C&P head Item no. 00118021-xx, 1x
– Nozzle type 706/906 Vectra ceramic Item no. 00345031-xx, 12x
– Assembly kit CO camera SST28/29 DLM2 Item no. 03023819-xx, 1x