OM-1833-001w_SL.pdf - 第15页

OM-1833 Safe-9 1210-001 5. Precautionary Items for Correct Operations 5. Precautionary Items for Correct Operations Precautionary Measures before Installation  A void any place that vibrates severely .  The ambient tem…

100%1 / 122
OM-1833
Safe-8
Alert Labels and Description
No. Alert Labels and Description
(1)
Description
In this tape feeder, a permanent magnet is used in the tape feed section and the
cover tape take-up section.
Nobody with an implanted pacemaker should operate the tape feeder.
Their pacemaker might be affected by magnetism, which might cause a serious
accident.
(2)
Description
If the tape feeder is dropped, it might injure your foot or the feeder itself be
damaged.
Handle one by one carefully and take care not to drop.
WARNING
CAUTION
1504-001
4. Alert Labels
Safety Precautions
OM-1833
Safe-91210-001
5. Precautionary Items for Correct Operations
5. Precautionary Items for Correct Operations
Precautionary Measures before Installation
Avoid any place that vibrates severely.
The ambient temperatures must be 20 ± 10
°
C and humidity 30 to 80 %.
Any dew condensation must be avoided.
When the machine is transferred to another place and the ambient temperature rises more
than the surface of the machine, dew may condense under the condition described below.
Note that dew condensation may cause the machine to break down.
Condition of Dew Condensation
Dew may condense when the difference (based on "Humidity (%)") between the ambient
temperature of the destination (the place where the machine was transferred) and the
surface temperature of the machine reaches the values or more in the table below.
Humidity (%) of Destination
Differences between Ambient Temperature of Destination
and Surface Temperature of Machine
80 3
°
C or more
70 6
°
C or more
60 8
°
C or more
50 10
°
C or more
40 14
°
C or more
30 18
°
C or more
Ensure that the selected place is free of electric noise, etc.
Precautionary measures (prevention of noise generation, etc.,) must be taken for other
equipment to prevent the machine from malfunctioning.
Do not expose the machine to combustible or corrosive gas.
Select a place free of lamp soot and dust.
Safety Precautions
OM-1833
Safe-101210-001
5. Precautionary Items for Correct Operations
Power Supply
As the power supply for this tape feeder, you must not use any power supply other than
the power supplied from the machine (Yamaha modular mounter (chip mounter)), or a
power supply specied by Yamaha.
Voltage : DC 24 V ± 10 %
Safety Precautions