OM-1833-001w_SL.pdf - 第54页
3.2 T ape Feeder Detachment Procedure CAUTION Do not drop the tape feeder , when attaching or detaching. Some tape feeder models are rather heavy . In the case that the feeder is removed with one hand, your hand might no…
(5) Hold the grip, and insert it forward carefully until a click sound is heard.
At the same time, make sure that the tape feeder connector has been securely
connected.
Connector
Fig. C4
Notice
•
If a tape feeder is used in a lifted state, the machine (Yamaha
modular mounter (chip mounter)) may be damaged or a pickup
malfunction may occur.
Mount the tape feeder securely on the feeder base.
•
Remove the unused tape feeders from the bank feeder change
cart.
Also, if the machine has been operated for a long time with
such unused tape feeders attached, then the tape will have
been slackened, which might cause a pick-up error.
1504-001
3.1 Tape Feeder Attachment Procedure
OM-1833
3-5
3.2 Tape Feeder Detachment Procedure
CAUTION
Do not drop the tape feeder, when attaching or
detaching.
Some tape feeder models are rather heavy.
In the case that the feeder is removed with one hand, your
hand might not be able to support the feeder weight when
it is removed from the base, which might cause a fall of
the feeder.
Falling of a tape feeder might cause an injury on your feet
or damage to the feeder.
Hold such feeder with your both hands one by one and
take care not to drop it.
Procedure
(1) Press the clamp cancel lever.
(2) Draw the tape feeder carefully to this side.
Clamp Cancel Lever
Fig. C5
1504-001
3.2 Tape Feeder Detachment Procedure
OM-1833
3-6
1504-001
3.3 Multi-Reel Stocker (Option)
Multi-Reel StockerThis stocker is used to enable the simultaneous setting operation
of the preceding tape and succeeding component reloading tape in each lane.(A
total of eight small reels can be set within the width as much as the feeder’s two
slots allow)
6/05
IRU6,*0$*
6/05
IRU6,*0$)*6
Hook
Hook
Fig. C6
Model No. and No. of Loadable Units
Table C2
No.
Applicable
machine
Model
Maximum
number
loadable
Number of
small reels set
Remarks
1 SIGMA-G5 SL-MR200 13 104 104 = 4 Lane × 2 Reel × 13 Stocker
2 SIGMA-F8
SL-MR800
10 80 80 = 4 Lane × 2 Reel × 10 Stocker
3 SIGMA-G5S 13 104 104 = 4 Lane × 2 Reel × 13 Stocker
3.3 Multi-Reel Stocker (Option)
OM-1833
3-7