OM-1833-001w_SL.pdf - 第47页
1504-001 2.4 T ape End Processing Procedure 2.4.1 Paper T ape End Processing Procedure Procedure (1) Insert the tape into the jig until the tape end reaches the end section. Note Hold the jig with the roller side turned …
1504-001
2.4 Tape End Processing Procedure
Notice
Depending on the tape end shape, it can’t be correctly loaded.
In order to attach the tape, make sure to process the tape end in
advance.
Before Tape End Processing After Tape End Processing
Before Tape End Processing
Paper Tape
Embossed
Tape
After Tape End Processing
Fig. B22
2.4 Tape End Processing Procedure
OM-1833
2-10
1504-001
2.4 Tape End Processing Procedure
2.4.1 Paper Tape End Processing Procedure
Procedure
(1) Insert the tape into the jig until the tape end reaches the end section.
Note
Hold the jig with the roller side turned up.
(The side where a pin is viewed, should be turned up).
Label
Insert it to the end.
Use the right side (P)
on the unit.
Tape
Fig. B23
(2) Push the jig into the unit and atten the tape end.
Push the jig
into the unit.
Fig. B24
(3) Make sure that the tape does not come out.
Fig. B25
OM-1833
2-11
1504-001
2.4 Tape End Processing Procedure
2.4.2 Embosseed Tape End Processing Procedure
Procedure
(1) Insert the tape into the jig until the tape end reaches the end section.
Note
Hold the jig with the roller side turned up.
(The side where a pin is viewed, should be turned up).
Label
Insert it to the end.
Use the left side (E)
on the unit.
Tape
Fig. B26
(2) Push the jig into the unit and atten the tape end.
Push the jig
into the unit.
Fig. B27
(3) The end processing been completed.
Fig. B28
OM-1833
2-12