Maintenance Manual.pdf - 第149页
RL1 31 MAINTENANCE MANUAL 7.4 I nserti on Head DA8ME C-Z 1-M00- A0 7.4- 6 12. Turn the plug of t he reducti on gear cl ockwise to r etighten. 13. Retight en the screw of t he head front cover and reat tach the c over. 14…
RL131
MAINTENANCE MANUAL
7.4 Insertion Head
DA8MEC-Z1-M00-A0
7.4-5
8. If oil nearly comes out, stop oiling once and turn the drain cock lever 90° as shown below. (This closes the
drain plug.)
9. Reattach the drain plug to the drain cock by turning it clockwise.
(Be sure to secure the plug in place. This prevents oil from spilling over even if the drain cock is opened
inadvertently.)
10. Press the hose against the hose clip to reattach.
11. Restart oiling.
Add oil from the oil port until oil level is above the center of the oil gauge while observing the oil gauge.
Oil port
Oil gauge
Drain plug
Hose clip
Hose
RL131
MAINTENANCE MANUAL
7.4 Insertion Head
DA8MEC-Z1-M00-A0
7.4-6
12. Turn the plug of the reduction gear clockwise to retighten.
13. Retighten the screw of the head front cover and reattach the cover.
14. Put in the handwheel to the shaft and tighten the screw to lock it in place.
Plug
Handwheel Head front cover Handwheel Lock screw
RL131
MAINTENANCE MANUAL
7.4 Insertion Head
DA8MEC-Z1-M00-A0
7.4-7
7.4.4 Transfer Chuck
Unit No. X02P55000AA
Inspection
Period
No.
Item Task Description
Daily a.
Transfer chuck
Make sure that the transfer chuck opens/closes
smoothly.
Oiling
Period
No.
Item Task
Oiling
volume
Description
1.
Cam follower
2.
Opening/closing
claw
3.
Plate
4.
Opening/closing
cam
Weekly
5.
Grease nipple
0.5 cm
3
Remove all dirt adhering on the surface
completely and apply a thin coat of grease.
3. Plate
a. Transfer chuck
1. Cam follower
1. Cam follower
4. Opening/closing
cam
5. Grease nipple
2. Opening/closing
claw