Maintenance Manual.pdf - 第237页

RL131 MAINTENANCE MANUAL 11.1 Material Saf ety Data S heet DA8MEC-4E-01 0-A0 1 1.1-16 11.1.8 Multe mp LRL N o.3 Oil name: Multemp LRL No.3 Manufacturer’s name: Kyodo Yushi Co., Ltd.  First Aid Measures  E y e contact I…

100%1 / 250
RL131
MAINTENANCE MANUAL
11.1 Material Safety Data Sheet
DA8MEC-4E-010-A0
11.1-15
11.1.7 LITHTAN 2
Oil name: LITHTAN 2
Manufacturer’s name: Exxon Mobil Corporation
First Aid Measures
Eye contact
Immediately flush with plenty of clear water for approx. 15 minutes or until irritation is gone. Promptly consult
a physician if irritation persists.
Skin contact
Flush contacted areas abundantly with soap and water.
Inhalation
Repose in fresh air. If inhaled excessively and symptoms such as headache, sickness, or dizziness are
identified, consult a physician promptly.
Ingestion
Do not induce vomiting. Promptly consult a physician.
Fire Fighting Measures
How to extinguish
Use fire extinguishing agents and do not water the fire directly.
Spray the surrounding with water to cool.
Prevent unauthorized entry to the fire area. Wear protective gears.
Avoid inhaling fume or vapor. Use a self-contained breathing apparatus in ill-ventilated room.
Fire extinguishing agents
Foam, dry chemical, carbon dioxide and loaded stream fire extinguisher.
Accidental Release Measures
Remove all ignition sources immediately. Wear the protective gears. Stop the leak.
Prevent the leaked grease to enter into drain, water courses, or lowland.
Collect the leaked grease, and spread the soil or absorber on the leaked area.
Precautions in Handling and Storage
Handling
Keep away from flame and sparks. Use an appropriate protective gears. Electric system should have an
explosion-proof construction and take measures against static electricity. Store all empty containers in the
same place.
Do not cut or weld containers.
Storage
Do not store nearby the fire or heat source, or strong oxidants.
Store in designated place where is well-ventilated, and label as a hazardous product.
Seal off unused containers.
Disposal Consideration
Disposed grease is considered as industrial waste. It is prohibited to dump or dispose in a landfill.
Business owners should dispose them by themselves following the law on Waste Disposal and Cleaning, or
entrust the disposal to the specialists approved by the governor.
RL131
MAINTENANCE MANUAL
11.1 Material Safety Data Sheet
DA8MEC-4E-010-A0
11.1-16
11.1.8 Multemp LRL No.3
Oil name: Multemp LRL No.3
Manufacturer’s name: Kyodo Yushi Co., Ltd.
First Aid Measures
Eye contact
Immediately flush with plenty of clear water for at least 15 minutes. Consult a physician.
Skin contact
After wiping off the contacted area, flush abundantly with soap and water.
Inhalation
Remove to fresh air. Warm with blankets or other means and repose. Consult a physician if necessary.
Ingestion
Do not induce vomiting. Promptly consult a physician. Wash out mouth with water.
Fire Fighting Measures
Fire extinguishing agents
Foam, dry chemical, carbon dioxide, and dry sand.
Things should not be done
Water spray can spread fire and hazardous situation may result.
Specific fire fighting measures
For fires at earlier stage, use dry chemical, carbon dioxide or dry sand to douse.
For large fires, it is effective to use fire foam to block off air.
Evacuate unauthorized individuals to a safe place.
Protecting the fire fighter
Wear the protective gears.
Approach from upwind of fire.
Accidental Release Measures
Precaution for human body
Be sure to wear the protective gears.
Precaution for environmental protection
Be careful not to allow leaked grease enter to the river, etc.
How to clean up leakage
Collect leaked grease in an airtight container.
Small amount of leakage can be wiped away with flux such as kerosene.
Preventive measures against second disaster
Remove all ignition sources immediately.
RL131
MAINTENANCE MANUAL
11.1 Material Safety Data Sheet
DA8MEC-4E-010-A0
11.1-17
Precautions in Handling and Storage
Handling
Technical countermeasures
Handle in well-ventilated place. Prevent leaks, overflows and scattering. Do not evaporate unnecessarily.
Precautions
Contact with eye may cause inflammation. Use protective glasses to prevent eye contact.
Contact with skin may cause inflammation. Use protective gloves to prevent skin contact.
Inhalation may lead to diarrhea or vomiting.
Seal off the container each time after use.
Safety handling precaution
When opening the container, wear gloves to protect hands against injury.
Storage
Appropriate storage condition
Seal off to store, to prevent dust and moist to get mixed in.
Avoid direct sunlight. Keep away from fire and heat source and store in dark place.
Safe packaging container material
Do not pressurize empty containers.
Do not weld, heat, drill or cut containers. Residue can catch fire with an explosion.
Disposal Consideration
Remaining waste
Dispose of properly in accordance with the law on waste disposal and cleaning.
Entrust the disposal to the specialists approved by the governor or to the local authorities responsible.
Do not dump into any sewers, on ground, or into any body of water.
Burn in an incinerator before disposing of in a landfill. Burnt residue must be below the criteria
stipulated by the relevant authorities.
Burn in a safe place in a manner where there is no possibility of hazard to others or damage to
properties. A guard must be placed.
Contaminated containers and packaging
Dispose of empty containers after cleaning the contents completely.