Maintenance Manual.pdf - 第166页

RL131 MAINTENANCE MANUAL 7.7 Anvil Unit DA8MEC-Z4-400-A 0 7.7-3 7.7.3 Replacing Oil (Reductio n Gear at t he Anv il Dri ve Unit) 1. 1. Loosen the s crews and det ach the f ront center cover. 2. Pull the hose f rom the ho…

100%1 / 250
RL131
MAINTENANCE MANUAL
7.7 Anvil Unit
DA8MEC-Z4-400-A0
7.7-2
7.7.2 Anvil Drive Unit
Unit No. N610069727AA
Inspection
Period
No.
Item Task Description
Daily a.
Worm reduction gear
Make sure that oil is not leaking from the reduction
gear.
Oiling
Period
No.
Item Task
Oiling
volume
Description
1.
Cam
0.5cm
3
Remove all dirt adhering on the surface
completely and apply a thin coat of grease.
2.
Cam follower
1 shot Inject 1 shot of grease using a grease gun.
Weekly
3.
Cam follower
0.5cm
3
Remove all dirt adhering on the surface
completely and apply a thin coat of grease.
Every
5,000
hrs
3.
Worm reduction gear
0.18 L
Replace the lubricant inside the reduction
gear every 5000 hours.
Drain oil: Open the lock valve at the
bottom of the worm reduction gear to
drain old oil.
Feed oil: After draining oil, pour new oil
from the oil port at the top of the
worm reduction gear. (up to the
middle of the check window)
a / 4. Reduction gear
1. Cam
3. Cam follower
2. Cam follower
RL131
MAINTENANCE MANUAL
7.7 Anvil Unit
DA8MEC-Z4-400-A0
7.7-3
7.7.3 Replacing Oil (Reduction Gear at the Anvil Drive Unit)
1.
1. Loosen the screws and detach the front center cover.
2. Pull the hose from the hose clip to detach it.
3. Loosen the screws and detach the belt cover.
4. Turn the plug of the reduction gear counterclockwise to remove it.
Plug
Front center cover
Hose clip
Hose
Belt cover
RL131
MAINTENANCE MANUAL
7.7 Anvil Unit
DA8MEC-Z4-400-A0
7.7-4
5. Turn the drain plug counterclockwise to remove it.
6. Put an oil pot under the drain cock. Raise the lever as shown in the
right to drain oil.
=REMARKS=
Be careful not to spill oil on the floor.
(The RL131 does not come with an oil pot. It should be prepared by the customer.)
7. After draining oil, leave the hose intact (drain cock open and drain plug removed) and pour oil from the oil
port, observing the end of the drain cock.
=REMARKS=
Leave the oil pot under the drain cock during oiling.
Oil port
Oil gauge
Drain plug
Oil pot