00191017-01.pdf - 第409页
User’s Manual Line Computer UNIX 14 Control / Control Modules Software Version 403.xx Edition 06/97 14.2 Job Control 14 - 9 Or: ● Activate the (Merge all) ic on. The dia log window cl oses and all jobs are adde d to the …
14 Control / Control Modules User’s Manual Line Computer UNIX
14.2 Job Control Software Version 403.xx Edition 06/97
14 - 8
14.2.3.2 SERVICES Menu
-
Merge
This menu option allows the following operations to be initiated:
- Inserting jobs from the job list displayed in the main window into a selected lot file.
- Inserting jobs from a selected lot file into the job list displayed in the main window.
- Inserting jobs from a selected lot file into the lot file displayed in the main window.
NOTE
All or individual jobs from the job list
or individual jobs from a lot file can only be inserted into the job
list or lot file in the main window from the "Merge" dialog window
.
All jobs from a lot file can also be inserted into the current job list or lot file with the aid of the
command (in the main window) (see section 14.2.3.6).
●
Click on SERVICES --> Merge... --> Job list or Lot file.
If "Lot file" is selected, the FSB containing all created lot files appears.
●
Select lot file by double-clicking.
In both cases the dialog window "Merge" is now displayed.
In the selection area all jobs are now listed that are contained in the job list or in the selected lot
file.
Fig. 14.2.2 "Merge" Dialog Window
●
Activate the (Merge) in the dialog window.
●
Select the desired jobs from the selection area.
The selected jobs are added to the current job list or lot file.
On the menu bar click on FILE --> Quit. The dialog window closes.
User’s Manual Line Computer UNIX 14 Control / Control Modules
Software Version 403.xx Edition 06/97 14.2 Job Control
14 - 9
Or:
●
Activate the (Merge all) icon.
The dialog window closes and all jobs are added to the current job list or lot file.
●
NOTE
If jobs have been selected that already exist in the job list or lot file, the message "Error during
merging the lot file! Job name used more than once" appears.
If individual
jobs from a lot file are inserted into the current job list, these jobs are no longer contained
in the lot file.
If all
jobs from a lot file are inserted into the current job list or lot file, the lot file is automatically
deleted.
-
Barcode type allocation list...
(Description see section 14.2.3.3)
-
Basic optimization data...
(Description see section 14.2.3.4)
-
Optimization dialog...
This menu option enables the optimization dialog (user interface of Set-Up Optimization to be opened.
●
Click on
SERVICES
-->
Optimization Dialog...
The main window of the Optimization Dialog is opened (see chapt. 11).
-
Results...
The "Results..." menu option can only be selected if a job was previously selected from the job list.
The results of the producibility check can be displayed for the selected job.
●
Deactivate all buttons in the command area.
●
Select the desired job from the job list.
●
Select
SERVICES
-->
Results...
The window containing the results of the producibility check is opened (see chapt. 11, Fig. 11.4.5).
The window displays the cycle time, the number of placement positions, the number of cycles and
the performance of the individual placement heads, the individual stations and the entire line.
14 Control / Control Modules User’s Manual Line Computer UNIX
14.2 Job Control Software Version 403.xx Edition 06/97
14 - 10
-
Error messages...
All error messages and warnings that occurred during a producibility check are stored in the "all.error"
file. The contents of the "all.error" file can be displayed by following the procedures described below.
●
Deactivate all icons in the command area.
●
Select faulty job by double-clicking.
(A faulty job is identified by an "F" preceding its name).
The main window of File Display is opened (see chapt. 4). It contains all error messages and
warnings that occurred during the producibility check.
Or:
●
Select faulty job by clicking on it once.
●
Click on
SERVICES
-->
Error messages...
The main window of File Display containing the contents of "all.error" file is opened.