Horizon UserManualV6.pdf - 第100页

STAGE 7 Load Paste, Run a Product in Step Mode If using squeegees with paste dispenser continue with Section Auto Paste Dispense. If using squeegees without paste dispenser go to Section Manual Paste Load. If using ProFl…

100%1 / 378
30. Select Exit (F8).
Step Single
Exit
31. Select Exit (F8).
Auto
Board
Manual
Board
Exit
Software Version 6 User Manual 1.83
MACHINE PROGRAMMING
STAGE 6
STAGE 7
Load Paste, Run a
Product in Step
Mode
If using squeegees with paste dispenser continue with Section Auto Paste
Dispense. If using squeegees without paste dispenser go to Section Manual
Paste Load. If using ProFlow go to Section Run a Product in Step Mode.
Auto Paste Dispense 1. Select Paste Load (F3).
Run Open
Cover
Paste
Load
Clean
Screen
Adjust Setup Monitor Maint.
2. Select Auto Dispense (F1).
Auto
Dispense
Manual
Load
Load
Cart.
Print
Directn
Exit
3. Select Exit (F8).
Auto
Dispense
Manual
Load
Load
Cart.
Print
Directn
Exit
4. Go to Section Run a Product in Step Mode.
Manual Paste Load 1. Select Paste Load (F3).
Run Open
Cover
Paste
Load
Clean
Screen
Adjust Setup Monitor Maint.
2. Select Manual Load (F2).
Auto
Dispense
Manual
Load
Load
Cart.
Print
Directn
Exit
3. Lift the front printhead cover.
1.84 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 7
4. Load the solder paste onto the screen.
5. Lower the front printhead cover.
6. Press the System button.
7. Select Continue (F1).
Continue
Software Version 6 User Manual 1.85
MACHINE PROGRAMMING
STAGE 7
WARNING
SOLDER PASTEAND SOLVENTS. WHEN USING OR HANDLINGAN
Y
SOLDER PASTE OR SOLVENT FORMULATION THE
MANUFACTURERS' RECOMMENDED SAFETY PRECAUTIONS
MUST BE STRICTLYADHERED TO.