Horizon UserManualV6.pdf - 第38页

21. Press the System button. 22. Select Exit (F8). Step Single Exit 23. Remove the board from the conveyor. 24. Select Setup (F6). Run Head Paste Load Clean Screen Adjust Setup Monitor Maint. 25. Select Change Screen (F5…

18. Open the front printhead cover.

19. Rotate the operator switch on the operator interface to the right. When the

pneumatic indicator displays green, ensure all the Formflex pins have risen.

NOTE

The operator switch must remain in the latched position Pins Up whilst the

current product setup is required.

20. Close the front printhead cover.

Software Version 6 User Manual 1.21

MACHINE PROGRAMMING

STAGE 4C

21. Press the System button.

22. Select Exit (F8).

Step

Single

Exit

23. Remove the board from the conveyor.

24. Select Setup (F6).

Run Head Paste

Load

Clean

Screen

Adjust

Setup

Monitor Maint.

25. Select Change Screen (F5).

Mode Load

Data

Edit

Data

Setup

Squeegee

Change

Screen

Change

Tooling

Change

Language

Exit

26. When prompted, open the front printhead cover.

1.22 User Manual Software Version 6

MACHINE PROGRAMMING

STAGE 4C

27. Remove the stencil.

28. Release the toggle levers amd remove the FormFlex setup plate from the

stencil.

29. Refit the stencil, ensuring the correct orientation.

Software Version 6 User Manual 1.23

MACHINE PROGRAMMING

STAGE 4C