Horizon UserManualV6.pdf - 第352页
6. Press Save (F3). Adjust Save Front Squeegee Rear Squeegee Step Up Step Down Exit Or: 7. Using Step Up and Step Down (F6 and F7) as necessary to raise or lower the front squeegee until it just touches the front rail. A…
Squeegee Pressure
Height
To complete this calibration, machines with non-feedback pressure system carry
out steps 1-13. For machines with pressure feedback option fitted carry out steps
14 - 17.
Non Feedback 1. Press Calibrat Heights (F2).
Change
Squeegee
Calibrat
Heights
Exit
The message ‘Ensure correct squeegees are fitted!’ is displayed.
2. Press Continue (F1).
Continue
Restore
Defaults
Exit
The message ‘Set Squeegee Pressure Height’ is displayed.
Either:
3. Press Adjust (F2).
Adjust
Save Front
Squeegee
Rear
Squeegee
Step
Up
Step
Down
Exit
The following window is displayed:
4. Using Next, Previous, Incr. and Decr. (F4, F5, F6 and F7) enter the
squeegee heights parameters as necessary.
Next Previous Incr. Decr.
Exit
5. Press Exit (F8).
Next Previous Incr. Decr.
Exit
Software Version 6 User Manual 9.51
CONSUMABLE REPLENISHMENTS
SQUEEGEES
Squeegee Heights Parameters
Front Zero Ref
Rear Zero Ref
4000
4040
6. Press Save (F3).
Adjust
Save
Front
Squeegee
Rear
Squeegee
Step
Up
Step
Down
Exit
Or:
7. Using Step Up and Step Down (F6 and F7) as necessary to raise or lower
the front squeegee until it just touches the front rail.
Adjust Save Front
Squeegee
Rear
Squeegee
Step
Up
Step
Down
Exit
8. Press Rear Squeegee (F5).
Adjust Save Front
Squeegee
Rear
Squeegee
Step
Up
Step
Down
Exit
9. Using Step Up and Step Down (F6 and F7) as necessary to raise or lower
the rear squeegee until it just touches the front rail.
Adjust Save Front
Squeegee
Rear
Squeegee
Step
Up
Step
Down
Exit
10. Press Save (F3).
Adjust
Save
Front
Squeegee
Rear
Squeegee
Step
Up
Step
Down
Exit
11. Press Exit (F8).
Adjust Save Front
Squeegee
Rear
Squeegee
Step
Up
Step
Down
Exit
12. Press Exit (F8).
Change
Squeegee
Calibrat
Heights
Exit
13. Press Exit (F8)
Mode Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
9.52 User Manual Software Version 6
CONSUMABLE REPLENISHMENTS
SQUEEGEES
Feedback Option 14. Press Calibrat Heights (F2).
Change
Squeegee
Calibrat
Heights
Exit
The message ‘Ensure correct squeegees are fitted!’ is displayed.
15. Press Continue (F1).
Continue
Restore
Defaults
Exit
The message ‘Calibrating Pressure Heights - DO NOT Open Covers!’ is
displayed.
16. Press Exit (F8).
Continue Restore
Defaults
Exit
17. Press Exit (F8).
Mode Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
Software Version 6 User Manual 9.53
CONSUMABLE REPLENISHMENTS
SQUEEGEES