Horizon UserManualV6.pdf - 第72页

13. Select Open Cover (F2). Adjust Open Cover Home Cleaner Board Stop Full Width Load Width Print Height Exit 14. Open the front printhead cover. 15. The MultiFlex tooling can now be fitted into the appropriate location …

100%1 / 378
8. Remove the stencil from the printer.
9. Close the front printhead cover.
10. Press the System button.
11. Select Change Tooling (F6).
Mode Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
The print carriage and the under screen cleaner are moved to the rear.
12. Select Full Width (F5).
Adjust Open
Cover
Home
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
The message ‘Checking for a board on the belts’ is displayed. Whilst the rear
rail is moving the following message ‘Rail moving...’ is displayed.
Software Version 6 User Manual 1.55
MACHINE PROGRAMMING
STAGE 5D
13. Select Open Cover (F2).
Adjust
Open
Cover
Home
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
14. Open the front printhead cover.
15. The MultiFlex tooling can now be fitted into the appropriate location holes in
the tooling plate. Ensure that the tooling is placed into the correct set of
holes, taking regard of the type of screen being used and hence the position
of the fixed rail.
1.56 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 5D
16. Lower the front printhead cover.
17. Press the System button.
18. Select Home Cleaner (F3).
Adjust Open
Cover
Home
Cleaner
Board
Stop
Board
Width
Load
Width
Print
Height
Exit
19. Select Board Width (F5).
Adjust Open
Cover
Remove
Cleaner
Board
Stop
Board
Width
Load
Width
Print
Height
Exit
20. Select Board Stop (F4).
Adjust Open
Cover
Remove
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
The camera moves to the board stop position. The board stop on the camera
extends.
21. Select Open Cover (F2).
Adjust
Open
Cover
Remove
Cleaner
Home
Camera
Full
Width
Load
Width
Print
Height
Exit
Software Version 6 User Manual 1.57
MACHINE PROGRAMMING
STAGE 5D