444CEMM2(CM201).pdf - 第103页

Routine Check List (1/1) Modular High Speed Placement Machine CM201/202 [Remarks] [Make copy and use this figure for checking.] Approval Signature Check ∗ When the result of the check is failure, make contact with ______…

100%1 / 107
Page 4
S
Self-diagnosis error (whole line).......................3-3
Self-diagnosis error........................................3-16
Servo switch OFF.....................................3-3, 3-4
SSR ready error .....................................3-6, 3-11
T
Tape feeder miss rate over ..............................3-4
Tape float (front side) ...............................3-3, 3-6
Tape float (rear side) ................................3-3, 3-6
Temperature compensation error (front side)...3-4
Temperature compensation error (rear side) ...3-4
V
Vacuum pump thermal error.............3-3, 3-5, 3-8
W
Width adjust error.............................................3-5
Width adjust start chk err .................................3-5
Wire ring error ..................................................3-6
Wire ring error (#0 to 15)..................................3-6
Wiring error (#0 to 15)......................................3-3
X
X-axis motion incomplete (front side)...............3-6
X-axis motion incomplete (rear side) ...............3-6
X-axis soft parameter error (front side) ............3-6
X-axis soft parameter error (rear side).............3-6
Y
Y-axis motion incomplete (front side) ...............3-6
Y-axis motion incomplete (rear side)................3-6
Y-axis soft parameter error (front side) ............3-6
Y-axis soft parameter error (rear side) .............3-6
Z
Z-axis motion incomplete (front side)...............3-6
Z-axis motion incomplete (rear side)................3-6
Z-axis soft parameter error (front side) ............3-6
Z-axis soft parameter error (rear side) .............3-6
444C-E-MMA0Z-A01-02
Routine Check List (1/1)
Modular High Speed Placement Machine
CM201/202
[Remarks]
[Make copy and use this figure for checking.]
Approval
Signature
Check
∗ When the result of the check is failure,
make contact with ___________ at once.
Passing ..................... OK
Failure .......................NG
Applying grease ........
Result of check
• For the check of once / week, check on the th day of real running every week.
• For the check of once / month, check on the
th day of real running every month.
• For the check of once / quarter, check on the
th day of real running every 3 months.
• For the check of once / half a year, check on the
th day of real running every 6 months.
• If the device does not run, write the mark ( ).
Cycle check
∗ The cycle for checking must be varied by the change of the run time and the number of the production for some routine
check items. However follow the direction by an instructor.
444C-409TE
tinU
dnakcehcrofstraP
noitacirbul
noitacirbuldnakcehC
rodradnatS
liodeificeps
doireP ecnerefeR 1 2 3 4 5 6 7 8 9 01 11 21 31 41 51 61 71 81 91 02 12 22 32 42 52 62 72 82 92 03 13
)ydobniam(tinuRM
eguagerusserP )noitarepoerofeb(erusserpriakcehCaPM87.0otaPM94.0)D1(h421-3-1
reviecerretaW)noitarepoerofeb(retawytpmE—)D1(h421-3-1
egrahcsidstrapGN
)ydobniam(xob
yarT)noitareporetfa(naelC—)D1(h424-3-1
-decroFehtgninaelC
tinUgnitcejE-pihC)noitpo(
tengaM,hsurB
naelC—)W1(h0418-4-1
tinuY-X
wercsllabsixa-XetacirbuL
ANIMATSLLEHS
2LRESAERG
)W1(h0416-4-1
gniraebraenilsixa-XetacirbuL
ANIMATSLLEHS
2LRESAERG
)W1(h0416-4-1
wercsllabsixa-YetacirbuL
ANIMATSLLEHS
2LRESAERG
)W1(h0416-4-1
gniraebraenilsixa-YetacirbuL
ANIMATSLLEHS
2LRESAERG
)W1(h0416-4-1
erusserpwolBehtfognittesehtkcehCerusserpwolBehtkcehC—)M1(h0653-5-1
ehtroF,elzzonehtgnitcelesroF(evlaV
)rednilyc
)tiKgnicalpeR(egnahcxE—)Y2(h000212-8-1
raebelbaCegnahcxE—)Y3(h000813-9-1
tinuZ
wercsllabsixa-ZetacirbuL
ANIMATSLLEHS
2LRESAERG
)W1(h0416-4-1
redlohelzzoN
)daehrefsnart(
noihsucelzzonrofgnirpSnaelC—)W1(h0413-4-1
ecnerefmucricretuodnarennInaelC—)W1(h0413-4-1
redlohwalcpmalcrofgnirpSesaergylppAV/LEIATREIRRAB)W1(h0413-4-1
mrapmalCesaergylppAV/LEIATREIRRAB)W1(h0413-4-1
ecafrepaTesaergylppAV/LEIATREIRRAB)W1(h0413-4-1
retliFegnahcxE—)W1(h0413-4-1
daehrefsnarT
gniraebtroppustfahselzzoNesaergylppAV/LEIATREIRRAB)M1(h0651-5-1
ssapriAerusserpmuucavehtkcehC—)M1(h0651-5-1
rednilyCriA)tiKgnicalpeR(egnahcxE—)Y1(h00064-7-1
)egnahcmuucavehtroF(evlaVegnahcxE—)Y2(h000211-8-1
tfahSegnahcxE—)Y3(h000811-9-1
redlohelzzoN)tiKgnicalpeR(egnahcxE—)Y3(h000812-9-1
mrapmalC)tiKgnicalpeR(egnahcxE—)Y3(h000812-9-1
redlohwalcpmalcrofgnirpS)tiKgnicalpeR(egnahcxE—)Y3(h000812-9-1
noihsucelzzonrofgnirpS)tiKgnicalpeR(egnahcxE—)Y3(h000812-9-1
lenaphcuotroloC
ecaflenaphcuoTnaelC—)W1(h0411-4-1
thgilkcaBegnahcxE—)Y1(h00066-7-1
royevnocdraoB
elbategnahcxehctabniptroppuSnaelC—)W1(h0414-4-1
tlebrefsnartdraoB
kcehC—)W1(h0415-4-1
egnahcxE—)M6(h00031-6-1
relloR
kcehC—)W1(h0415-4-1
egnahcxE—)M6(h00031-6-1
wercsllabtnemtsujdahtdiWesaergylppA
ANIMATSLLEHS
2LRESAERG
)W1(h0415-4-1
gniraebraeniltnemtsujdahtdiWesaergylppA
ANIMATSLLEHS
2LRESAERG
)W1(h0415-4-1
elbatredeefepaT
ecafgnittesredeefepaT)noitarepoerofeb(naelC—)D1(h423-3-1
sgnidnuorruSnaelC—)W1(h0412-4-1
dornoitcejorPkcehC—)W1(h0412-4-1
gniraebraeniLesaergylppA
ANIMATSLLEHS
2LRESAERG
)W1(h0412-4-1
aremaceniL
ssalgrevoC)noitarepoerofeb(naelC—)D1(h422-3-1
sneLnaelC—)W1(h0417-4-1
)noitpo(xobepatdesU
edisnI)noitareporetfa(naelC—)D1(h425-3-1
tinugnittuC
).noitponasiUD/D(
kcolbedilsedis-tfeLetacirbuL
ANIMATSLLEHS
2LRESAERG
)M1(h0652-5-1
edalbdexifdnaedalbelbavoMegnahcxE—)Y1(h00061-7-1
epatelbuodroftinU
)noitpo(redeef
gniraebraeniLetacirbuL
ANIMATSLLEHS
2LRESAERG
)W1(h0412-4-1
)noitpo(elzzoN
ecafrepatelzzoNnaelC—)W1(h0413-4-1
rotcelferelzzoNnaelC—)W1(h0413-4-1
pitelzzoNnaelC—)W1(h0413-4-1
)noitpo(regnahcelzzoN
rotcelferelzzonehtfoecaftcatnoCnaelC—)W1(h0413-4-1
ydobniaM
pmupmuucaVegnahcxE—)Y1(h00062-7-1
esabredeefepaT
rednilyCriA)tiKgnicalpeR(egnahcxE—)Y1(h00065-7-1
)redeefepatehtforednilycroF(evlaVegnahcxE—)Y2(h000213-8-1
rotacidnI
)rotacidniroloc-3(retacidnisutatSegnahcxE—)Y1(h00063-7-1
retacidniegatSegnahcxE—)Y1(h00063-7-1
-decroFehtgninaelC
tinUgnitcejE-pihC
)noitpo(
tengaM,hsurB
naelC—)W1(h0418-4-1
Year Month
Page A-1
444C-E-MMA0A-A01-00
MATERIAL SAFETY DATA SHEET
Product name : SHELL STAMINA GREASE RL2
Manufacture’s name : Showa Shell Sekiyu K.K.
FIRST AID MEASURES
Symptoms and effects : Not expected to give rise to an acute hazard under normal conditions of use.
First Aid-Inhalation : Inhalation of any vapours from this product is not likely to present an acute hazard.
First Aid-Skin : Remove contaminated clothing and wash affected skin with soap and water.
If persistent irritation occurs, obtain medical attention.
If high pressure injection injuries occur, obtain immediate medical attention.
First Aid-Eye : Flush eye with copious quantities of water. If persistent irritation occurs, obtain
medical attention.
First Aid-Ingestion : Wash out mouth with water and obtain medical attention.
DO NOT INDUCE VOMITING.
Advice to physicians : Treat symptomatically. Aspiration into the lungs may result in chemical pneumonitis.
Dermatitis may result from prolonged or repeated exposure.
FIRE FIGHTING MEASURES
Specific hazards : Combustion is likely to give rise to a complex mixture of gases and airborne particu-
lates, including carbon monoxide, oxides of sulphur, and unidentified organic
and inorganic compounds.
Extinguishing media : Foam and dry chemical powder. Carbon dioxide, sand or earth may be used for
small fires only.
: Water in a jet. Use of Halon extinguishers should be avoided for environmental
reasons.
Protective equipment : Proper protective equipment including breathing apparatus must be worn when
approaching a fire in a confined space.
ACCIDENTAL RELEASE MEASURES
Personal precautions : Avoid contact with skin and eyes.
Personal protection : Wear impermeable gloves and boots.
: Prevent from entering into drains, ditches or rivers. Inform local authorities if this
cannot be prevented.
: Shovel into a suitable, clearly marked container for disposal or reclamation in
accordance with local regulations.
: As for small spills.
Unsuitable extinguish-
ing media
Environmental
precautions
Clean-up methods-
small spillage
Clean-up methods-
large spillage