444CEMM2(CM201).pdf - 第33页
Page 2-33 MACHINE P ARAMETER 2 2 2 Procedures of Machine Parameter T eaching 22. Press . 23. Press UNLOCK + Run . 444C-E-MMA02-A04-04 444C-EEn-MpMpPp-013
Page 2-32
Procedures of Machine Parameter Teaching
16. Remove the height-teaching jig from
the slot No. 7 on the feeder base, and
set it to the slot No. 21.
17. Close the safety cover.
18. Turn ON the servo switch.
19. Press
UNLOCK
+ Pick pos teach .
20. Press
UNLOCK
+ Jig remove .
21. Pull out the cable from the connecter,
detach the height-teaching jig, and
then return to step 2.
OFF ( )
ON ( )
SERVO
444C-E-MMA02-A04-07
444C-477P
Height-teaching jig
To the next page
Page 2-33
MACHINE PARAMETER
2
2
2
Procedures of Machine Parameter Teaching
22. Press .
23. Press
UNLOCK
+ Run .
444C-E-MMA02-A04-04
444C-EEn-MpMpPp-013
Page 2-34
444C-E-MMA02-A04-05
2-2-6 Mount Position
∗ It is required that the pick-up position teaching has been completed.
Preparation
••
••
• Press Nozzle arrangement in “Pro-
duction config menu.”
1
Select a stage.
2
Press
UNLOCK
+ Nzl set posi move .
3
Attach six 110 nozzles to the head on the
selected stage.
4
Press
UNLOCK
+ Nozl set chk .
• Make sure that there are no abnormal mea-
surement values.
∗ When the indication on which the production
data is reflected is not 110 nozzle, the warning
message appears; however, ignore it.
5
Press Recog scrn .
• Make sure that the attached six nozzles are
displayed in white orderly.
To the next page
Tools 15 minutes
1005R feeder, 110 nozzle for 1005 × 6
Required time
Procedures of Machine Parameter Teaching