444CEMM2(CM201).pdf - 第32页

Page 2-32 Procedures of Machine Parameter T eaching 16. Remove the height-teaching jig from the slot No. 7 on the feeder base, and set it to the slot No. 21. 17. Close the safety cover . 18. T urn ON the servo switch. 19…

100%1 / 107
Page 2-31
MACHINE PARAMETER
2
2
2
Procedures of Machine Parameter Teaching
8. Close the safety cover.
9. Turn ON the servo switch.
10. Press
UNLOCK
+ Pick pos teach .
11. Press
UNLOCK
+ Jig remove .
• The head moves to the jig setting position, and
then the indication of the servo switch changes
to OFF automatically.
12. Press .
∗ Pressing this toggles the indication. In this
step, choose right.
13. Press
UNLOCK
+ Jig setting .
14. Turn OFF the servo switch.
15. Open the safety cover.
To the next page
444C-E-MMA02-A04-06
OFF ( )
ON ( )
SERVO
2
OFF ( )
ON ( )
SERVO
1
Teach Posi
Left
2
1
Page 2-32
Procedures of Machine Parameter Teaching
16. Remove the height-teaching jig from
the slot No. 7 on the feeder base, and
set it to the slot No. 21.
17. Close the safety cover.
18. Turn ON the servo switch.
19. Press
UNLOCK
+ Pick pos teach .
20. Press
UNLOCK
+ Jig remove .
21. Pull out the cable from the connecter,
detach the height-teaching jig, and
then return to step 2.
OFF ( )
ON ( )
SERVO
444C-E-MMA02-A04-07
444C-477P
Height-teaching jig
To the next page
Page 2-33
MACHINE PARAMETER
2
2
2
Procedures of Machine Parameter Teaching
22. Press .
23. Press
UNLOCK
+ Run .
444C-E-MMA02-A04-04
444C-EEn-MpMpPp-013