444CEMM2(CM201).pdf - 第18页

Page 2-18 Procedures of Machine Parameter T eaching 16. Press UNLOCK + Jig setting . • After the head has traveled to the jig setting position, the servo switch turns OFF automati- cally . 17. T urn OFF the servo switch.…

100%1 / 107
Page 2-17
MACHINE PARAMETER
2
2
2
Procedures of Machine Parameter Teaching
9. Set the nozzles to all the nozzle
holders.
• At this time, 3 is displayed in the pos field.
10. Close the safety cover.
11. Turn ON the servo switch.
12. Press
UNLOCK
+ .
• The nozzle at the pos 3 will be measured.
13. Press
UNLOCK
+ Jig, Nozzle setting .
• At this time, 4 is displayed in the pos field.
14. Press
UNLOCK
+ .
15. Teach all the nozzle holders by
repeating the steps from 13 to 14.
∗ The display in the pos field switches in
sequence from 3→4→5→6→1→2.
To the next page
444C-E-MMA02-A02-05
Z axis orgin tch
Nozzle hight teach
Z axis orgin tch
Nozzle hight teach
444C-EEn-MpMptOpm-022
444C-EEn-MpMptOpm-023
OFF ( )
ON ( )
SERVO
Page 2-18
Procedures of Machine Parameter Teaching
16. Press
UNLOCK
+ Jig setting .
• After the head has traveled to the jig setting
position, the servo switch turns OFF automati-
cally.
17. Turn OFF the servo switch.
18. Open the safety cover.
19. Set the height teaching jig to the slot
No. 21 on the feeder base.
∗ The cable is still connected to the connector at
the left end.
20. Close the safety cover.
21. Turn ON the servo switch.
To the next page
444C-E-MMA02-A02-05
OFF ( )
ON ( )
SERVO
OFF ( )
ON ( )
SERVO
444C-477P
Height teaching jig
Page 2-19
MACHINE PARAMETER
2
2
2
Procedures of Machine Parameter Teaching
22. Press
UNLOCK
+ R pick pos teach .
• The nozzle at the pos 3 will be measured.
23. Press
UNLOCK
+ Jig loading .
• The jig is transported into the specified stage,
and the transfer head travels to the measuring
place on the jig.
24. Press .
• The nozzle will raise.
25. Turn OFF the servo switch.
26. Open the safety cover.
27. Put the thickness gauge (0.01 mm)
under the nozzle.
To the next page
OFF ( )
ON ( )
SERVO
2
444C-E-MMA02-A02-05
444C-421E
444C-459P
Thickness gauge
Nzl Extend
OFF
1