444CEMM2(CM201).pdf - 第60页
Page 3-20 Check and Solutions 444C-E-MMA03-A03-04 444C-EEn-PcNa-013 9 . Press . 10 . After solving the error , press UNLOCK + Nozl set chk . • The message “ Nozzle is set correctly . ” ap- pears. 11 . Press OK . • Resume…
Page 3-19
3
SOLUTIONS FOR ERROR
3
3
Check and Solutions
444C-E-MMA03-A03-03
To the next page
• Check the sizes of the registered and the
measured nozzles at the screen.
7. Press ESC and then
UNLOCK
+ Nozl set chk .
• If some nozzles have not been set or if the
registered nozzle size is different from the
measured one, an error occurs and the mes-
sage appears.
• Press OK .
8. Press Recog scrn .
• The whole and the individual nozzle recogni-
tion image can be checked.
[Possible factors]
• Nozzle setting mistake
• Foreign bodies on the nozzle tip
• Chipped nozzle tip
• Deformation of the nozzle
• Contamination of the reflector
• Contamination of the LED cover
• Contamination of the camera lens
[Solutions]
• Cleaning the nozzle, reflector, camera lens,
and cover lens
• Replacing the nozzle
Page 3-20
Check and Solutions
444C-E-MMA03-A03-04
444C-EEn-PcNa-013
9. Press .
10. After solving the error, press
UNLOCK
+ Nozl set chk .
• The message “Nozzle is set correctly.” ap-
pears.
11. Press OK .
• Resume the production.
Page 3-21
3
SOLUTIONS FOR ERROR
3
3
Check and Solutions
444C-E-MMA03-A03-04
To the next page
2. Checking the details of nozzle checking operation error (Without the nozzle changer)
• To solve the error occurred in the nozzle
checking operation in starting production, use
the following procedure.
1. Press Yes .
• The screen returns to the main menu.
2. Press
Product
config
.
3. Press Nozzle arrangement .