444CEMM2(CM201).pdf - 第28页

Page 2-28 444C-E-MMA02-A04-07 Procedures of Machine Parameter T eaching 2-2-4 XY Plane Calibration 1. Press . 2. Select the stage for teaching. ∗ Select AF or BF . ∗ After the front side is taught, the rear side is taugh…

100%1 / 107
Page 2-27
MACHINE PARAMETER
2
2
2
OFF ( )
ON ( )
SERVO
444C-E-MMA02-A03-04
Procedures of Machine Parameter Teaching
13. Turn OFF the servo switch.
14. Press
UNLOCK
+ Jig remove .
• Remove the nozzle jig.
15. Press .
• The “Machine prmtr teach menu” screen
reappears.
444C-EEn-MpMptCrc-022
2
1
Page 2-28
444C-E-MMA02-A04-07
Procedures of Machine Parameter Teaching
2-2-4 XY Plane Calibration
1. Press .
2. Select the stage for teaching.
∗ Select AF or BF.
∗ After the front side is taught, the rear side is
taught continuously.
3. Press
UNLOCK
+ Jig setting .
4. Put the jig into the mounting parts,
and fit it to the stopper.
5. Press
UNLOCK
+ Jig adjust .
6. Stick the jig to the standard guide.
7. Press
UNLOCK
+ .
• The front side teaching is performed, then the
rear teaching is performed.
Tools Required time 60 minutes XY plane calibration jig
444C-EEn-MpMpt-004
444C-EEn-MpMptXpc-011
444C-EEn-MpMptXpc-012
PCB positioning
XY plane cal
Xy plane cal teach
To the next page
Page 2-29
MACHINE PARAMETER
2
2
2
Procedures of Machine Parameter Teaching
8. Press
UNLOCK
+ Jig remove .
9. Remove the jig.
10. Press .
11. Press
UNLOCK
+ Run .
• All the heads move to each origin position.
444C-E-MMA02-A04-06
444C-EEn-MpMptXpc-013
2
1