444CEMM2(CM201).pdf - 第16页

Page 2-16 Procedures of Machine Parameter T eaching 3. Press OrgPickMount height . • The “ Origin Pickup Mount Height ” screen appears. 4. Select the stage for teaching. 5. Press UNLOCK + Jig, Nozzle setting . 6. T urn O…

100%1 / 107
Page 2-15
MACHINE PARAMETER
2
2
2
Procedures of Machine Parameter Teaching
2-2-1 Origin Pickup Mounting Height
Preparations
Turn off the servo switch and carry out the operation.
1. Input - 20 for the Z-axis of “Origin Offset” at the “Machine Parameter” screen.
1. Return to
“
Machine parameter menu
”
screen and press
Machine parameter teach .
2. Press
UNLOCK
→→
→→
→
START
.
• The “Machine prmtr teach menu” screen is
displayed.
To the next page
444C-E-MMA02-A02-03
Tools
Height teaching jig, thickness gauge 0.01 mm, and nozzle
Required time 15 minutes
433C-EEn-Mp-002
Page 2-16
Procedures of Machine Parameter Teaching
3. Press OrgPickMount height .
• The “Origin Pickup Mount Height” screen
appears.
4. Select the stage for teaching.
5. Press
UNLOCK
+ Jig, Nozzle setting .
6. Turn OFF the servo switch.
7. Open the safety cover.
8. Set the height teaching jig to the slot
No. 7 on the feeder base and connect
the cable to the connector at the left
end.
To the next page
444C-EEn-MpMpt-004
444C-E-MMA02-A02-06
1
Height teaching jig
Cable
OFF ( )
ON ( )
SERVO
444C-476P
Connector
2
Page 2-17
MACHINE PARAMETER
2
2
2
Procedures of Machine Parameter Teaching
9. Set the nozzles to all the nozzle
holders.
• At this time, 3 is displayed in the pos field.
10. Close the safety cover.
11. Turn ON the servo switch.
12. Press
UNLOCK
+ .
• The nozzle at the pos 3 will be measured.
13. Press
UNLOCK
+ Jig, Nozzle setting .
• At this time, 4 is displayed in the pos field.
14. Press
UNLOCK
+ .
15. Teach all the nozzle holders by
repeating the steps from 13 to 14.
∗ The display in the pos field switches in
sequence from 3→4→5→6→1→2.
To the next page
444C-E-MMA02-A02-05
Z axis orgin tch
Nozzle hight teach
Z axis orgin tch
Nozzle hight teach
444C-EEn-MpMptOpm-022
444C-EEn-MpMptOpm-023
OFF ( )
ON ( )
SERVO