User Manual SIPLACE Head Care Station -.pdf - 第13页

2 Safety 2.1 Conventions for the use of safety instructions User Manual SIPLACE Head Care Station 10/2017 13 2 Safety Knowledge of and compliance with the safety instructions contained in the user manual of the SIPLACE m…

1 Introduction

1.4 Important notes on this user manual

12 User Manual SIPLACE Head Care Station 10/2017

1.4.5 Further information about and contents of the documentation package

1.4.5.1 How to get information

If you have any further questions concerning this manual or if you would like additional information

on a particular topic, please get in touch with your local SIPLACE organization.

1.4.5.2 SIPLACE on the World Wide Web (WWW)

homepage at http://www.siplace.com.

You can choose between the German and English versions.

The different sections contain information about our products, services and contact persons.

In addition, registered customers can also access the MySIPLACE user group. Here you can call

up special information about our placement systems, e.g.

●

technical documentation

●

technical information

●

spare parts lists etc.

Registration for theMySIPLACE user group is very simple:

► Click at the head of the web site on and then on the Register

link.

► Fill in the registration form and send it off to us.

Soon afterwards, you will receive your access authorization with user name and password

1.4.6 Abbreviations

CEE Commission on the Rules for the Approval of the Electrical Equipment

C&P20 P SIPLACE SpeedStar C&P20P for top placement performance

C&P20 M2 SIPLACE SpeedStar C&P20M2 for high-precision placement

C&P20 A SIPLACE SpeedStar C&P20A for very high speed placement

C&P20 M SIPLACE SpeedStar C&P20M for top placement accuracy

CPP SIPLACE MultiStar CPP for flexible placement performance

CPP M SIPLACE MultiStar CPPM for flexible placement accuracy

ESD Electrostatically-sensitive devices

EMC Electromagnetic compatibility

HCS Head Care Station

P&P Pick&Place module, SIPLACE TwinStar

TH Twin Pick&Place head, SIPLACE TwinStar

2 Safety

2.1 Conventions for the use of safety instructions

User Manual SIPLACE Head Care Station 10/2017 13

2 Safety

Knowledge of and compliance with the safety instructions contained in the user manual of the

SIPLACE machines is a prerequisite for any work on the HCS. The following safety notes are an

extract from the safety instruction of the user manuals for SIPLACE machines.

DANGER

Risk of injury to personnel and damage to the machine

Nonobservance of the safety instructions may cause injury to personnel and damage to the

head care station.

► Please observe the safety instructions in the user manual of the relevant head for all

work conducted.

WARNING

Safe operation of the Head Care Station (HCS)

Safe operation of the HCS depends absolutely on the operator being familiar with the user

manual and safety instructions and putting them into effect.

The HCS cover is always locked during the test sequences as long as the Stop or EMER-

GENCYOFF button is not pressed. It is not allowed to remove any cover or bypass the

safety devices/switches of the HCS during operation.

DANGER

Non-observance of the following safety instructions may cause injury to personnel

and damage to the machine!

► Please observe the safety instructions in this user manual.

2.1 Conventions for the use of safety instructions

This manual contains notes that must be observed to guarantee your personal safety and to avoid

damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-

lows according to the level of risk:

DANGER

Definition

For the purposes of this manual, this indicates that fatal or severe injuries or considerable

damage to property will occur if this hazard warning is not observed.

WARNING

Definition

For the purposes of this manual, this indicates that fatal or severe injuries or considerable

damage to equipment may occur if these warning instructions are not followed.

CAUTION

Definition

For the purposes of this manual, this indicates that minor injuries or damage to property

may occur if this caution is not observed.

NOTICE

Definition

For the purposes of this manual, this note provides information about the product or indic-

ates a part of the manual that requires particular attention.

2 Safety

2.1 Conventions for the use of safety instructions

14 User Manual SIPLACE Head Care Station 10/2017

2.1.1 Qualified personnel

Qualified or adequately trained personnel means that these people are familiar with the setting up,

installation and operation of the SIPLACE Head Care Station and are suitably qualified, for ex-

ample:

●

Have been trained, instructed or authorized to switch on and off, isolate, earth and identify

electrical circuits and system components in accordance with normal safety standards.

●

Have been trained or instructed in the upkeep and use of appropriate safety equipment in

accordance with normal safety standards.

2.1.2 Important notes on operational safety

The following points MUST be observed in order to maintain operational safety:

2.1.2.1 General

► The operational safety of the SIPLACE Head Care Station can only be guaranteed if the sys-

tem is used as prescribed and in accordance with the instructions in the user / software manu-

als.

► Always follow any safety regulations specific to your country.

► Make sure that the warning labels are always clearly identifiable and always easily readable.

► Replace any damaged warning or notice labels. Replace any labels that are missing.

► If it is necessary to work on the machine and you do not have adequately trained personnel

within your operation, always call in an ASM Assembly Systems GmbH&Co.KG service en-

gineer. ASM Assembly Systems GmbH&Co.KG will not accept liability for any damage or

consequential damage that is the result of unauthorized/incorrect work.

► Always switch off the main switch before performing work on the z-axis.

► If particularly hazardous situations are identified while the HCS is in use, the machine owner

must immediately notify the manufacturer in writing so that appropriate action can be taken to

reduce the potential danger.

WARNING

Severe injuries and damage to equipment in the case of incorrect usage!

In spite of all the safety precautions taken by the manufacturer, failure to use the system as

prescribed can result in severe injury and considerable damage to the equipment. For the

HCS to be safe, it must be used correctly by qualified personnel and all warnings must be

observed.

► Specially trained personnel is a prerequisite for the installation and operation of the

HCS.

2.1.2.2 Safety of operators and other persons

► Machine operators must only carry out work for which they have been adequately trained and

with which they are totally familiar.

WARNING

The HCS is electrically driven. Certain parts carry dangerous voltage levels.

There is a risk of death, severe injury and/or considerable damage to equipment if these in-

structions are not followed.

► Switch off the main switch and disconnect the HCS head unit from the power supply

before installing or uninstalling a head, or before performing work on the z-axis.

2.1.2.3 Safety of plant and equipment

► Never make changes, however minor, unless you are totally aware of the effect they will have

on the overall functioning of the system.

► Do not make modifications to the safety equipment. In particular, NEVER deactivate circuit-

breakers or remove safety devices.