User Manual SIPLACE Head Care Station -.pdf - 第37页
2 Safety 2.9 ESD Guidelines 28 User Manual SIPLACE Head Care Station 10/2017 2.9.5 Dispatching ESD Modules ► Always store modules and components in conductive packaging (e.g. metalized plastic bags or metal sleeves) and …
3 HCS description
3.1 Overview of the modules
36 User Manual SIPLACE Head Care Station 10/2017
During head verification, the software tells you which tool to insert before the next step. Each test
starts with the endurance test unit.
To make sure that the orientation of the inserted tool is correct, each tool has a distinct edge(1) at
the front to identify the tool front. The tool is correctly positioned in the tool area if its front points to-
wards you.
Each tool has a unique recess(1) on its left side for identification purposes. If the sensors in the
sensor bar cannot identify the inserted tool as the correct tool, a warning message is displayed on
the screen.
CAUTION
Tool not correctly aligned!
If the tool is not inserted correctly, damage to the mounted placement head could occur
during head verification. This could also lead to wrong measurement results.
► Always ensure to insert and clamp the tool correctly.
3.1.2 Control box
Fig.25: Control box [03149138-xx]
1 USB and LAN connector 2 Hotlink connector
3 DVI connection for monitor 4 Connector power supply to the head unit
5 Connector for main power supply 6 Main power switch incl. micro fuse 4.0A
(5x20 Time-Lag 250VAC ceramic)
7 CAN-Bus connector
2 Safety
2.9 ESD Guidelines
28 User Manual SIPLACE Head Care Station 10/2017
2.9.5 Dispatching ESD Modules
► Always store modules and components in conductive packaging (e.g. metalized plastic bags
or metal sleeves) and dispatch them in conductive packaging.
► If the packaging is not conductive, place the modules in a conductive envelope before pack-
aging. Use conductive expanded rubber, ESD bags, domestic aluminium foil or paper, for ex-
ample. NEVER use plastic bags or film.
► If the module has integral batteries, ensure that the conductive packaging does not touch or
short-circuit the battery terminals and, if necessary, first cover the terminals with insulating
tape or material.
3 HCS description
3.1 Overview of the modules
38 User Manual SIPLACE Head Care Station 10/2017
3.1.4 Case with tools [03122285-xx]
Fig.27: Case with tools
1 5x Plastic case 36x36x12 [00384333-xx]
with:
●
Nozzle type 2069 cpl. [03094135-xx]
●
Nozzle type 1069 [03094112-xx]
●
Nozzle type 4069 [03106244-xx]
●
Nozzle type 4004 [03098544-xx]
●
Nozzle type 4105 [03102457-xx]
2 Space for component camera SST23
[03003426Sxx]
3 Calibration jig version SST23
[03034148-xx]
Calibration part version 3 [03010565-xx]
4 Calibration tool pocket [03086419-xx]
5 Force-measurement-unit – HCSII
[03086502-xx]
6 Space for component camera SST30
[03085394Sxx]
7 Stopper P+P – HCSII [03119655-xx] 8 Nozzle station CP20-HCSII
[03086323-xx]
9 Vacuum-pressure measurement unit –
HCSII [03085726-xx]
10 Unit for endurance test HCSII
[03086515-xx]