AppX.A_spec_mx3600_sys_10.11.pdf - 第5页

MX - 3600 / CXI3600M X / Specification confidential 5/ 39 spec_mx3600_sys_10.11.doc Fig .1: In -Line Co nfiguration w ith Pass-Through In/Ou t Conveyor Fig .2 : Oper ator Terminal with 19’’ Flatpanel Fig .3: ASYS Autow i…

MX-3600 / CXI3600MX / Specification

confidential 4/39 spec_mx3600_sys_10.11.doc

1. Inspection & System Concept

The MX-3600…is an automatic X-Ray Inspection system for high speed

applications usable for off-line and/or in-line solder joint inspection in

SMT-Lines. The Transmission X-RAY Technology is base on sealed

(closed) X-RAY tube technology and 12 bit digital imaging.

1.1. System-Overview / Key Features

The key features are the following:

 Pass Through Mode

 Load/Unload Time < 9 sec

 Fiducial-Test Capability

 Inspection area 18“ x 12“ (455 x 305mm)

 Variable field of view from 0,6’’ to 1,05’’ square (15mm to 30mm)

 125 kV X-RAY tube with object resolution till 10µ

 High Resolution 1k x 1k Digital Camera Technology

 Inspection Speed 3 Images/sec (up to 3 sq.inch/sec)

 Automatic Width Adjust

 AXI Software with solder-joint and component algorithm library for automatic

defect detection on PCB-Assembly applications

 Offline programming with inspection data management, auto-program generation

and test coverage display and analysis

 CXI3600(standard) compatibility for existing 3600 applications (using common

input CAD data and CAD-Compile output data: n2a file …!)

 Real-time process control (SPC)

 SPC alarm and logging function

 Link to MIPS Verification & Repair Station

MX-3600 / CXI3600MX / Specification

confidential 5/39 spec_mx3600_sys_10.11.doc

Fig.1: In-Line Configuration with Pass-Through In/Out Conveyor

Fig.2: Operator Terminal with 19’’ Flatpanel

Fig.3: ASYS Autowidth Conveyor

MX-3600 / CXI3600MX / Specification

confidential 6/39 spec_mx3600_sys_10.11.doc

1.2. General System Setup Capabilities & Interfacing

 Standard Production Type (Standard): automatic / in-line

Optional: automatic / off-line

 Inspection Technology (Standard): 2D / Transmission X-RAY

Optional: AOI for selective components

 Sample Load (Standard): Pass Through Conveyor

Technology

Optional: manual load (only with off-line

option)

 Handling- Interface (Standard): SMEMA

Optional: Customized Handshake

Interface

 Inspection Type (Standard): 100% inspection with data

and result output after

complete board inspection

Configurable with standard system: sample mode or conditional

failure mode!

 MIPS_Verify Link (Standard): Network Link to verification

and repair station incl.

Pass/Fail Select

Optional: Additional Verification Stations

Fig.4: AXI System with verification/repair process flow