SOM-1617-001.pdf - 第31页
8. Data Operation 8. Data Operation When “3. OPERA TE” is selected at the “** MAIN MENU **” window (Fig. 4), the following window appears on the screen. Fig. 34 [Displayed Contents] SW A P : Select this label to replace …
(2) After the component name (ID) is entered, press the [ENT] key.
When the entered component name (ID) is correct, the window
(Fig. 32) appears on the screen.
After the window has appeared for a certain period of time, the feeder
No. (FDR NO.) and the component name (ID) to be checked sub-
sequently are displayed.
After the components of all feeders are checked completely, the
system is shifted to the “7.3.4 Result Response” session.
Fig. 32
(3) When the entered component name (ID) is not correct, a warning
peep sounds twice and the window (Fig. 33) appears on the screen.
When the [ENT] key is pressed, the window (Fig. 26) resumes, en-
abling you to manually enter the name (ID) of the component that
caused a component shortage error.
Fig. 33
** BC INPUT **
EMPTY FDR NO. 999
INPT ID XXXXXXXXXXXX
XXXXXXXXXXXX
<OK>
** COMP EMPTY **
EMPTY FDR NO. 999
INPT ID XXXXXXXXXXXX
XXXXXXXXXXXX
<NG>
<INPUT ERROR>HIT ENT
7.3 Checking the Components for the Current and Next Programs
021 1-001 2 9 AIH01EGP
8. Data Operation
8. Data Operation
When “3. OPERATE” is selected at the “** MAIN MENU **” window
(Fig. 4), the following window appears on the screen.
Fig. 34
[Displayed Contents]
SWAP : Select this label to replace the component list of the current
program (current product’s program) stored in the bar code
reader with the list of the next program (next-term product’s
program). This function should be used when a program
change operation is performed.
CLR1 : Select this label to clear the component list of the current
program stored in the bar code reader.
It is required to clear the list once when all feeders of the
current program are checked.
CLR2 : Select this label to clear the component list of the next pro-
gram stored in the bar code reader. It is required to clear
the list once when all feeders of the next program are
checked.
FDR : Select this label to set “ON” or “OFF” for “FDR CHECK ?”
when the feeder No. (FDR NO.) should also be checked
with the component and the actual objects (Nos. of the cur-
rently selected and newly prepared feeders) are collated.
8.1 Operation
(1) When the [F1] (SWAP) key is pressed, the ID list of the current
program (current product’s program) is replaced with the ID list of
the next program (next-term product’s program).
(2) When the [F2] (CLR1) key is pressed, the ID list of the current pro-
gram is cleared.
(3) When the [F3] (CLR2) key is pressed, the ID list of the next program
is cleared.
(4) When the [F4] (FDR) key is pressed, it is determined whether or not
the selected feeder No. should be checked.
0211-001 30
AIH01EGP
** DATA OPERATION **
SWAP CLR1 CLR2 FDR
8.2 Confirmation of Operation
When the [F1], the [F2], or the [F3] key is pressed, the following window
appears, prompting the confirmation to the selected operation.
Fig. 35
When the [F1] (YES) key is pressed, the selected function is imple-
mented. After that, the “** MAIN MENU **” window (Fig. 4) resumes.
When the [F3] (NO) key is pressed, the selected function is interrupted
and the “** MAIN MENU **” window resumes.
8.3 Setting of Confirmation to Feeder No. and Check-
ing on Collation of Actual Component Names
When the [F4] key is pressed, the following window appears on the
screen, enabling you to determine whether or not the feeder No. should
be checked.
Fig. 36
When the [F1] (ON) key is pressed, it is determined that the feeder No.
should be checked. As a result, the feeder No. is checked after the com-
ponent ID.
When the [F3] (OFF) key is pressed, it is determined that the feeder No.
should not be checked. As a result, only the component ID is checked.
0211-001 31
AIH01EGP
** DATA OPERATION **
ARE YOU SURE ?
YES NO
** DATA OPERATION **
FDR CHECK ?
ON OFF
8.2 Confirmation of Operation