SOM-1617-001.pdf - 第4页

Before Use

• Identifying Alert Icons

: This symbol mark represents danger or prompts warn-

ing.

: This symbol mark represents prohibited operations.

: This symbol mark represents forced operations or in-

structions.

2. Explained in this manual are only the items different from those in

the instruction manual of the main machine.

Use the instruction manual of the main machine together with this

manual.

3. The contents of this manual are subject to change without prior

notice.

Please contact our marketing department or sales agency for the

detailed information on these special specifications.

021 1-001 2 AIH01EGP

021 1-001 3 AIH01EGP

Contents

Page

Before Use

..................................................................................

......................................... 1

Contents

......................................................................................

........................................... 3

1. Scope

......................................................................................

........................................... 5

2. Function

..................................................................................

......................................... 5

3. Monitor on Machine Side

........................................................

............................ 6

3.1 “Feeder Checker Set-up” Widnow

......................................

................... 6

3.2 “Next Prgm Set-up” Window

..............................................

....................... 8

4. Feeder Check Operation

........................................................

............................ 9

4.1 Prerequisite

........................................................................

.................................... 9

4.2 Feeder Check Procedure

....................................................

.......................... 9

4.2.1 Checking the current program

......................................

................... 9

4.2.2 Checking the pattern program data

pre-set as one for the next program

....................

.......... 9

4.2.3 Checking the feeder which caused

a component shortage error

................................

................ 10

5. Cause of Feeder Check Event

(due to component shortage)

..................................

................. 11

6. Operation Flow

........................................................................

.................................... 12

7. Handling of Bar Code Reader

..................................................

......................... 13

7.1 Startup

................................................................................

........................................ 13

7.2 “** MAIN MENU **” Window

................................................

........................ 13

7.3 Checking the Components for

the Current and Next Programs

............................

.............. 15

7.3.1 Checking the component name (ID)

..............................

............... 15

7.3.2 Checking the feeder No.

................................................

........................ 17

7.3.3 Entering the component name (ID) manually

................

........ 20

7.3.4 Result Response

............................................................

.............................. 21

7.3.5 Displaying the component to

be checked subsequently

....................................

.................. 23

7.3.6 Displaying the previously checked component

............

...... 23

7.3.7 Checking the name (ID) of the components

that caused a shortage error

................................

................ 23

Contents

Page

7.3.8 Checking the feeder No. that

caused a component shortage error

....................

.......... 25

7.3.9 Entering the name (ID) of the component manually

that caused a component shortage error

..............

....... 28

8. Data Operation

........................................................................

.................................... 30

8.1 Operation

............................................................................

...................................... 30

8.2 Confirmation of Operation

..................................................

......................... 31

8.3 Setting of Confirmation to Feeder No. and

Checking on Collation of Actual Component Names

....

.. 31

9. Setting the Number of Bar Code Digits

..................................

................. 33

9.1 Operation

............................................................................

...................................... 33

10. Masking the Component Name (ID) to be Checked

..............

....... 34

10.1 Operation

..........................................................................

..................................... 34

11. Program Setup

......................................................................

................................... 36

12. Process Flow

..........................................................................

..................................... 37

13. Table of Key Codes

................................................................

................................ 38

14. Materials

................................................................................

........................................ 39

Layout of Panel 3

..................................................................

................................. 39

Layout of Control P.C.B.

........................................................

............................ 40

Power Circuit Diagram (2)

....................................................

.......................... 41

Feeder Checker Connection Diagram

..................................

................. 42

021 1-001 4 AIH01EGP