SOM-1617-001.pdf - 第6页

Contents

Page

7.3.8 Checking the feeder No. that

caused a component shortage error

....................

.......... 25

7.3.9 Entering the name (ID) of the component manually

that caused a component shortage error

..............

....... 28

8. Data Operation

........................................................................

.................................... 30

8.1 Operation

............................................................................

...................................... 30

8.2 Confirmation of Operation

..................................................

......................... 31

8.3 Setting of Confirmation to Feeder No. and

Checking on Collation of Actual Component Names

....

.. 31

9. Setting the Number of Bar Code Digits

..................................

................. 33

9.1 Operation

............................................................................

...................................... 33

10. Masking the Component Name (ID) to be Checked

..............

....... 34

10.1 Operation

..........................................................................

..................................... 34

11. Program Setup

......................................................................

................................... 36

12. Process Flow

..........................................................................

..................................... 37

13. Table of Key Codes

................................................................

................................ 38

14. Materials

................................................................................

........................................ 39

Layout of Panel 3

..................................................................

................................. 39

Layout of Control P.C.B.

........................................................

............................ 40

Power Circuit Diagram (2)

....................................................

.......................... 41

Feeder Checker Connection Diagram

..................................

................. 42

021 1-001 4 AIH01EGP

1. Scope

021 1-001 5 AIH01EGP

1. Scope

This specially specified function is used with the bar code reader and

determines whether or not the correct components are loaded onto the

machine when the tape feeders are installed on the feeder carriage or

the components are prepared beforehand, preventing wrong installation

of feeders.

2. Function

• Current Program Component Check Function

When the feeders loaded with components are installed on the feeder

carriage, this function checks whether the loaded components are

correctly selected in compliance with the current pattern program data

(pattern program data selected for the current production model).

The machine cannot be started unless the feeder check operation is

completed.

• Next Program Component Pre-Check Function

This function pre-checks the components scheduled to be used in the

pattern program data for the next program, making it possible to start

the operation of the machine without checking the components after

the next program is set up in the “PROGRAM CHANGE” tab sheet.

• Replenishment Component Check Function

This function checks whether or not the feeders are replenished with

correct components after a component shortage error has occurred.

(a) It is also possible to invalidate these functions.

(b) Types of Readable Bar Codes

· JAN Code

· NW7 Code

· CODE39 Code

· ITF Code

3. Monitor on Machine Side

3.1 “Feeder Checker Set-up” Window

When the [Next] key (*1) is pressed in the “Opn.Mode” tab sheet, the

following sheet appears on the screen.

“Enable” or “Disable” can be selected in the “Feeder Checker Set-up”

group box.

Fig. 1 “Opn. Mode” Tab Sheet

*2 Feeder Checker Set-up

[Enable] Button : Automatic operation cannot be started unless

the feeder check operation is completed.

[Disable] Button : Automatic operation can be started regard-

less of the feeder check function.

*3 Output Data

[Shortage] Button : When a component shortage error is de-

tected, the check data is transmitted to the

bar code reader.

When components for which a component

shortage error cannot be detected are used

and a component missing error is detected

during pick-up sequence, the check data is

transmitted to the bar code reader.

[All Missing] Button : When no component is picked up (all com-

ponents missing), the data check is trans-

mitted to the bar code reader regardless of

whether or not the tape end detection is used.

021 1-001 6

AIH01EGP

*2

*3

*4

*5

*1

*7

*6

3. Monitor on Machine Side