00196589-02 - IM Traceability 3.1_en.pdf - 第12页
Installation Traceability Installation 12 Installation Manual SIPLACE Traceability 3.1 Setup Verification System Configuration of the Splice Detection NOTE: This Dialog will only appear for the machine wi th the station-…
Installation Traceability
Installation
Installation Manual SIPLACE Traceability 3.1
11
4 Installation Traceability
4.1 Installation
You must log in as administrator at the station computer to install the traceability options.
Welcome Dialog
License Dialog
NOTE:
The installation on the station computer (activation of Traceability) is only required on station
SW 40x, 50x and 60x.
X Place the SIPLACE Traceability CD into your
CD-ROM drive. The installation starts
automatically.
X The Start screen appears.
X Read the license agreement. If you agree with
the conditions, click on I accept ..., otherwise
click on I do not accept.... If you select I do not
accept ..., the installation procedure will be
terminated.
X Click on Next to continue the installation
procedure.
Installation Traceability
Installation
12 Installation Manual SIPLACE Traceability 3.1
Setup Verification System
Configuration of the Splice Detection
NOTE:
This Dialog will only appear for the machine with the station-software version 407.05 and
505.05!
X The station software version 407.05 and
505.05 offers two different interfaces to the
Setup verification system. By choosing the
corresponding Setup verification system the
interface will be configured in the station-
software accordingly.
X Click Next to continue.
NOTE:
This dialog will not appear for X series machines since the splice interface is always integrated
into the X feeders and is not available for S feeders at these machines!
X Select the checkbox Splice detection
existing, if a splice detection is available.
X Enter the COM Port where Splice detection is
plugged in.
X Click Next to continue.
Installation Traceability
Installation
Installation Manual SIPLACE Traceability 3.1
13
Fill Level Control (1)
Fill Level Control (2)
X If the fill level control should be disabled for
single tracks, activate the checkbox "Running
tracks" empty is allowed. After that you can
let single tracks go empty consciously.
X Click Next to continue.
X If the filling level correction should be allowed,
activate the checkbox Operator may correct
the filling level. After that the operator may
correct the filling level. Otherwise only the user
with the right "LineEngineer" and higher can
correct the filling level.
X Click Next to continue.