SA_3214_en.pdf - 第14页

14 14 5 Licences 5.2 EU Declaration of Conformity cab Produkttechnik GmbH & Co KG Wilhelm-Schickard-Str . 14 D-76131 Karlsruhe Deutschland EU Declaration of Conformity We declare herewith that as a result of the mann…

100%1 / 40
13
5 Licences
5.1 Declaration of Incorporation
cab Produkttechnik
GmbH & Co KG
Wilhelm-Schickard-Str. 14
D-76131 Karlsruhe
Deutschland
Declaration of Incorporation
We declare herewith that the following „partly completed machinery“ as a result of design, construction and the version
put in circulation complies with the essential requirements of the Directive 2006/42/EC on machinery:
Annex I, Article 1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.2.1, 1.3.2, 1.5.2, 1.5.8, 1.6.3, 1.7
In the event of any alteration which has not been approved by us being made to any device as designated below, this
statement shall thereby be made invalid.
Device: Swing Applicator
Type: 3214
Applied EU Regulations and Norms:
Directive 2006/42/EC on machinery
• EN ISO 12100:2010
• EN ISO 13849-1:2008
• EN 60950-1:2006
+A11:2009+A12:2011+A1:2010+A2:2013
Personauthorisedtocompilethetechnicalle: Erwin Fascher
Am Unterwege 18/20
99610 Sömmerda
Signed for, and on behalf of the Manufacturer:
cab Produkttechnik Sömmerda
Gesellschaft für Computer-
und Automationsbausteine mbH
99610 Sömmerda
Sömmerda, 19.06.2017
Erwin Fascher
Managing Director
Theproductmustnotbeputintoserviceuntilthenalmachineryintowhichitistobeincorporatedhasbeendeclaredin
conformity with the provisions of the Directive on machinery
The documents according annex VII part B from the incomplete machinery are created and will commit to state agencies
on request in electronic kinds.
14 14
5 Licences
5.2 EU Declaration of Conformity
cab Produkttechnik
GmbH & Co KG
Wilhelm-Schickard-Str. 14
D-76131 Karlsruhe
Deutschland
EU Declaration of Conformity
We declare herewith that as a result of the manner in which the device designated below was designed, the type of
construction and the devices which, as a result have been brought on to the general market comply with the relevant
fundamental regulations of the EU Rules for Safety and Health. In the event of any alteration which has not been
approved by us being made to any device as designated below, this statement shall thereby be made invalid.
Device: Swing Applicator
Type: 3214
Applied EU Regulations and Norms: Applied Norms:
Directive 2014/30/EU relating to electromagnetic compatibility
• EN 55032:2012
• EN 55024:2010
• EN 61000-6-2:2005
Directive 2011/65/EU on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
• EN 50581:2012
Signed for, and on behalf of the Manufacturer:
cab Produkttechnik Sömmerda
Gesellschaft für Computer-
und Automationsbausteine mbH
99610 Sömmerda
Sömmerda, 19.06.2017
Erwin Fascher
Managing Director
15
6 Installation
6.1 Factory Defaults
i
Note!
Theapplicatorisbythefactoryadjustedafterdefaultvaluesinastandardconguration.Attitudesafter
thesevaluesguaranteeasmoothoperationwithsameconguration.
i
Note!
Incaseofacustomersetupwillbetheadjustmentswiththecustomizedconguration.
It's possible that the values are different to the standard values.
Then the values in the setup protocol are valid.
The standard settings are:
- Connecting on a cab Hermes+ printer, vertical
- Used Pad: cab part No.: 5963881 54x36
cab part No.: 5963878 54x36
- Used material for ex-factory settings: cab part No.: 5556472 54x35.5
- Pressure value of the compressed air 0.45 MPa (4.5 bar)