SA_3214_en.pdf - 第4页

4 4 1 Introduction 1.1 Instructions Important information and instructions in this documentation are designated as follows: Danger! Draws attention to an exceptionally great, imminent danger to your health or life due to…

100%1 / 40
3
1 Introduction ............................................................................................................................................ 4
1.1 Instructions ...............................................................................................................................................4
1.2 Intended Use ............................................................................................................................................4
1.3 Safety Instructions ....................................................................................................................................4
1.4 Safety Markings .......................................................................................................................................5
1.5 Environment .............................................................................................................................................5
2 Product Description ...............................................................................................................................6
2.1 Important Features ...................................................................................................................................6
2.2 Technical Data ..........................................................................................................................................6
2.3 Overview .................................................................................................................................................. 7
2.4 Contents of Delivery .................................................................................................................................9
3 Operation .............................................................................................................................................. 10
3.1 Standard Operation ................................................................................................................................10
3.2 Cleaning .................................................................................................................................................10
4 Error Messages .................................................................................................................................... 12
4.1 Error Messages of the Printer ................................................................................................................ 12
4.2 Error Messages of the Applicator ...........................................................................................................12
5 Licences ................................................................................................................................................13
5.1 Declaration of Incorporation ...................................................................................................................13
5.2 EU Declaration of Conformity .................................................................................................................14
6 Installation ............................................................................................................................................ 15
6.1 Factory Defaults .....................................................................................................................................15
6.2 Tools .......................................................................................................................................................16
6.3 Mounting the applicator ..........................................................................................................................16
6.4 Transport lock.........................................................................................................................................17
6.5 Mounting the Pad ...................................................................................................................................18
6.6 Mounting the Blow Tube .........................................................................................................................18
6.7 Connecting the Compressed Air ............................................................................................................19
7 Adjustments .........................................................................................................................................20
7.1 Pad Adjustments .................................................................................................................................... 20
7.2 Adjusting the Swing Area of the Pad ......................................................................................................21
7.3 Stopper for Operation Mode "Blow on" .................................................................................................. 22
7.4 Adjusting the Sensors of the Swing Drive ..............................................................................................23
7.5 Adjusting the Speed of the Swing Drive .................................................................................................23
7.6 Sensors on Cylinder Z ............................................................................................................................24
7.7 Lift Speed of Cylinder Z ..........................................................................................................................25
7.8 Adjusting the pressure reduction valve .................................................................................................. 25
7.9 Vacuum Adjustments ..............................................................................................................................26
7.10 Blow Tube (Support Air) Adjustments .....................................................................................................27
8 Conguration
........................................................................................................................................29
8.1 Method for Changing the Printer Setup ..................................................................................................29
8.2 Quick Mode for Setting the Delay Times ................................................................................................29
8.3 CongurationParametersoftheApplicator ...........................................................................................30
8.4 Setting the Peel Position ........................................................................................................................31
8.5 Activation of Peel-off Mode .................................................................................................................... 31
9 Operation .............................................................................................................................................. 32
9.1 Test Mode without Print Job ...................................................................................................................32
9.2 Test Mode with Print Job ........................................................................................................................32
10 Spare Parts ........................................................................................................................................... 33
10.1 Retainer Assembly ................................................................................................................................. 33
10.2 Pneumatics Retainer Assembly .............................................................................................................34
10.3 Electronics Retainer Assembly ...............................................................................................................35
10.4 Swing Drive / Cylinder Assembly ...........................................................................................................36
10.5 Pad Assembly ........................................................................................................................................37
11 Drawings ...............................................................................................................................................38
11.1 Block Diagram Type 3214 ......................................................................................................................38
11.2 Pneumatic Drawing Type 3214 ............................................................................................................. 39
12 Index ......................................................................................................................................................40
Table of Contents
4 4
1 Introduction
1.1 Instructions
Important information and instructions in this documentation are designated as follows:
Danger!
Draws attention to an exceptionally great, imminent danger to your health or life due to hazardous
voltages.
!
Danger!
Draws attention to a danger with high risk which, if not avoided, may result in death or serious injury.
!
Warning!
Draws attention to a danger with medium risk which, if not avoided, may result in death or serious injury.
!
Caution!
Draws attention to a danger with low risk which, if not avoided, may result in minor or moderate injury.
!
Attention!
Draws attention to potential risks of property damage or loss of quality.
i
Note!
Advice to make work routine easier or on important steps to be carried out.
Environment!
Gives you tips on protecting the environment.
Handling instruction.
Reference to section, position, illustration number or document.
Option(accessories,peripheralequipment,specialttings).
Time
Information in the display.
1.2 Intended Use
• The device is manufactured in accordance with the current technological status and the recognized safety rules.
However, danger to life and limb of the user or third parties and/or damage to the device and other tangible assets
can arise during use.
• The device may only be used for its intended purpose and if it is in perfect working order, and it must be used with
regard to safety and dangers as stated in the operating manual.
• The device applicator mounted on a cab printer of the Hermes+ series is intended exclusively for applying suitable
materials that have been approved by the manufacturer. Any other use or use going beyond this shall be regarded
as improper use. The manufacturer/supplier shall not be liable for damage resulting from unauthorized use; the
user shall bear the risk alone.
• Usage for the intended purpose also includes complying with the operating manual, including the manufacturer‘s
maintenancerecommendationsandspecications.
i
Note!
The complete and current version of the documentation can be found in the Internet.
1.3 Safety Instructions
!
Attention!
Initiation,adjustmentsandchangingofpartsaretobeperformedbyqualiedservicepersonnelonly.
!
Warning!
This is a class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
5
1 Introduction
• Before mounting the delivered components disconnect the printer from the power supply and close the shutoff
valve of the applicator.
• Only connect the device to other devices which have a protective low voltage.
• Switch off all affected devices (computer, printer, accessories) before connecting or disconnecting.
• In operation, moving parts are easily accessible.
This applies especially for the zone, where the pad is moved between the starting and the labelling position.
During operation do not reach into that zone and keep long hair, loose clothes, and jewelry distant. Before any
manipulations in those areas, close the shutoff valve.
• The device may only be used in a dry environment, do not expose it to moisture (sprays of water, mists, etc.).
• Do not use the device in an explosive atmosphere.
• Do not use the device close to high-voltage power lines.
• Perform only those actions described in this operating manual.
Work going beyond this may only be performed by trained personnel or service technicians.
• Unauthorized interference with electronic modules or their software can cause malfunctions.
• Otherunauthorizedworkonormodicationstothedevicecanalsoendangeroperationalsafety.
• Alwayshaveserviceworkdoneinaqualiedworkshop,wherethepersonnelhavethetechnicalknowledgeand
tools required to do the necessary work.
• There are various warning stickers on the device. They draw your attention to dangers. Warning stickers must
therefore not be removed, as then you and other people cannot be aware of dangers and may be injured.
1.4 Safety Markings
3
1
2
1: Warning potential injury by
moving parts!
2:
Cylinder is under pressure, also
after it is switched off!
3:
Danger of crushing hands and/or
ngersbythemovingpad!
!
Attention!
Never remove or cover safety markings!
Replace it in case of damage!
Fig. 1 Safety marking
1.5 Environment
Obsolete devices contain valuable recyclable materials that should be sent for recycling.
Send to suitable collection points, separately from residual waste.
The modular construction of the applicator enables it to be easily disassembled into its component parts.
Send the parts for recycling.