00196433-02_AI_Vakuumpumpe_X-Serie_70XDE+EN.pdf - 第66页
Montageanleitung Vakuumpumpe SIPLACE X-Serie Ausgabe 04/2009 66
Montageanleitung Vakuumpumpe SIPLACE X-Serie
Ausgabe 04/2009
65
1.12 Instandhaltung
1
Bitte lesen Sie hierzu auch die Betriebsanleitung der Vakuumpumpen Herstellers Becker (siehe
Anhang). 1
1
Wir empfehlen:
Monatlich
Prüfen des Laufs der Vakuumschläuche auf
dem Portal (müssen auf Abstand parallel zum
Kabelschlepp laufen. Andernfalls besteht Ge
-
fahr, daß der Kabelschlepp bzw. die Schläuc-
he beschädigt werden. 1
4-monatlich
Blendenring kpl. C&P20 auf Verschmutzung prüfen und ggf. tauschen
Art.Nr.: 03046344-xx
Vakuumfilter F10 prüfen und ggf. tauschen
Art.Nr.: 03070370-xx
3-jährlich
Filtereinsatz prüfen und ggf. tauschen
Art.Nr.: 03077677-xx
Schiebersatz prüfen und ggf. tauschen
Art.Nr.: 03077679-xx
1
1
1
Filtereinsatz und Schiebersatz haben eine Lebensdauer von 25.000 h. 1
1
1
1
Montageanleitung Vakuumpumpe SIPLACE X-Serie
Ausgabe 04/2009
66
Assembly instructions: Vacuum pump for SIPLACE X-series
04/2009 Edition
67
2 Assembly instructions: Vacuum
pump for SIPLACE X-series
2.1 Description of the functions
A vacuum is needed for the C&P 20 A placement head. In the past, the entire vacuum was gen-
erated by Venturi nozzles in the C&P 20 A placement head. 2
This vacuum pump generates a vacuum more efficiently (than Venturi nozzles) and thus reduces
the power
consumption. In this way it covers the basic vacuum requirement. 2
2
The TwinHead and CPP placement head are not vacuum pump-compatible. The compressed air
supply for the gantry concerned must not be converted to vacuum operation. If this done, the re-
turn cylinder cannot move out and the Z axis thus remains in the top position. 2
2
If a gantry is converted from CP20A to TwinHead or CPP head, the original compressed air supply
must be restored for this gantry. All the modules for this gantry must be refitted.
Partial conversion of the pneumatic unit, for example, can lead to
serious faults in the placement
machine in compressed air operation because the gantry hoses are detached (additional hoses
for vacuum). 2
2
If a gantry with TwinHead or CPP is converted to CP20A with vacuum operation, the vacuum op-
eration must be retrofitted for this gantry.
If a C&P head that has been converted to vacuum oper
ation is used on a gantry with compressed
air, the silicone hoses may become detached from the segments, leading to serious damage to
the head. 2
2
2
Hoses must NOT be bent, not even during unpacking, otherwise they are no longer usable. 2
2
2