00196433-02_AI_Vakuumpumpe_X-Serie_70XDE+EN.pdf - 第87页
Assembly instructions: Vacuum pump for SIPLACE X-series 04/2009 Edition 87 : Fix the hoses (two-color) to the “Duo hose connection”. Fig. 2.8 - 15 Running the v acuum hose, gantry 1+3 : Run the hoses (transpare nt) under…
Assembly instructions: Vacuum pump for SIPLACE X-series
04/2009 Edition
86
: Fix the vacuum tubes “Vacuum connection 1 + 2” as shown in Fig. 2.8 - 13 using the clamp
(03032860-), one M3x30 mm screw and a washer.
Fig. 2.8 - 14 Running the vacuum hose, gantry 1+3
: Fix the “Duo hose connection” (03038107-) using M3x16 mm screws (see Fig. 2.8 - 14).
: Run the two “Duo hoses” (two-color) parallel to the existing cable and hose carrier.
2
2
2
Assembly instructions: Vacuum pump for SIPLACE X-series
04/2009 Edition
87
: Fix the hoses (two-color) to the “Duo hose connection”.
Fig. 2.8 - 15 Running the vacuum hose, gantry 1+3
: Run the hoses (transparent) under the guide plate and up
(see Fig. 2.8 - 15).
2
As there are different variants of the gantry cable and hose carrier, there may be differences here.
If necessary, use cable ties to fix the hoses to the ex
isting cables (see Fig. 2.8 - 8).
Be careful NOT to reduce the ho
se cross-sections with the cable ties. 2
2
2
2
2
2
2
2
2
Assembly instructions: Vacuum pump for SIPLACE X-series
04/2009 Edition
88
: Cut the two colored hoses to length: 490 mm.
: Attach the hoses to the “Duo hose connection” and the connector on the cable and hose carrier
(see F
ig. 2.8 - 15 and Fig. 2.8 - 16).
Fig. 2.8 - 16 Running the vacuum hose, gantry 2+4
2
: Check that the vacuum hoses are run correctly on the gantry. They must run parallel to the ca-
ble and hose carrier at a distance from it, otherwise there is a risk that the cable and hose car-
rier or the hoses themselves will be damaged.
2
2
2
2