STM1-S_SDV_Maintenance(Eng_Ver1).pdf - 第21页
Chap ter 1 This Chapter describes the work environment and working tools for the maintenance of the machine. Conditions fo r Main t e nanc e Multi -Func tional Placer ST M1-S M ain ten an ce Ha nd bo ok 1-1 2 T ools for …
Chapter 1
This Chapter describes the work environment and working tools for the maintenance of
the machine.
Conditions for Maintenance
Multi-Functional Placer
STM1-S Maintenance Handbook
1-11
Tools for Maintenance
Step 6.
Move the rear lever forward and remove the air inside
the lubricator using the handle.
Step 7.
After visual check, inject appropriate amount of grease
pressing the handle.
Step 8.
After lubrication, remove the waste grease that has
leaked out.
Caution
Inject the specified grease using the specified lubricator according to
the proper method.
Do not lubricate in any manner other than that shown above.
If the machine's operating environment is harsh, check its lubrication
status frequently.
Chapter 1
This Chapter describes the work environment and working tools for the maintenance of
the machine.
Conditions for Maintenance
Multi-Functional Placer
STM1-S Maintenance Handbook
1-12
Tools for Maintenance
Conditions for Maintenance
4. Grease List
Part No. Part Name Use Specifications Ref.
HP09-000258 GREASE-GUN_MG70_THK
- X Frame LM Guide, Ball Screw
- Y Frame Ball Screw
- Y Frame LM Guide
THK / MG70 70g Exclusive use GUN
CM02-000083 GREASE-GREASE_AFE-CA+70_THK;SYNTHETIC,OL
- X Frame LM Guide, Ball Screw
- Y Frame Ball Screw
- Y Frame LM Guide
AFE-CA+70 Volume: 70g
CM02-000084 GREASE-GREASE_AFE-CA+400_THK;OIL,SYNTHET AFE-CA+400 Volume: 400g
CM02-900022 GREASE GADUS S2 V220-2 - Head LM Guide GADUS S2 V220-2 Volume: 15kg
CM02-900008 GREASE AFF-70 - Head Ball Spline AFF-70 Volume: 70g
Chapter 2
Inspection Items for Maintenance
Multi-Functional Placer
STM1-S Maintenance Handbook
2-1
Daily Inspections
Check-up List
Replacement
Time
Reference
Time
required
Period No Inspection Item Measures Tools
Daily
D-1 Nozzle Inspect and clean Air gun, swab, Ethyl Alcohol 2 years
After use of the
machine
10 Minutes
D-2 Feeder, Feeder Base Clean Brush, cloth
After use of the
machine
10 Minutes
D-3 Air Filter Inspect and replace 1 year Frequent inspection 30 Minutes
D-4 Mist Separator Filter Inspect and replace 1 year Frequent inspection 30 Minutes
D-5 Conveyor steel belt Inspect Frequent inspection 5 Minutes
D-6
Unmanned transporter for obsolete
tapes
Inspect and clean Frequent inspection 5 Minutes
D-7 Detach nozzle pad Inspect and replace 6 month Frequent inspection 5 Minutes
Setting the replacement period for parts
ㆍ Based on the regulated use environment.
ㆍ If the use environment is poor, the intervals for part inspection and replacement can be shortened.
ㆍ In the above table, C/S means our designated C/S company (STS) or our overseas local agents.
Chapter 2
Inspection Items for Maintenance
Daily Inspections