STM1-S_SDV_Maintenance(Eng_Ver1).pdf - 第82页
Y e ar ly Inspe ction and Appe ndix Chap ter 6 Multi -Func tional Placer ST M1-S M ain ten an ce Ha nd bo ok 6-1 0 Ring blower inverter setup Y ear ly Inspection and Appendix H04 Number of motor poles is selected. 2/4/6/…
Yearly Inspection and Appendix
Chapter 6
Multi-Functional Placer
STM1-S Maintenance Handbook
6-9
Ring blower inverter setup
C03 Intelligent input terminal 3 is set. "0-FW(Forward operation command)
1-RV(Reverse operation command)
2-CF1(variable speed 1)
3-CF2(variable speed 2)
4-CF3(variable speed 3)
5-CF4(variable speed 4)
6-JG(Jog operation command)
8-2CH(2-step accelerate/decelerate command)
9-FRS(Free-run command)
10-EXT(External trip)t
11-USP(Unattended Start Protection)
12-SFT(Soft lock)
13-AT(Analog input voltage/current switchover)
14-RS(Reset)
15-STA(Start)
16-STP(Maintain)
17-F/R(Forward/reverse)
18-UP(Remote control UP)
19-DOWN(Remote control DOWN)
20-O/R(Operate/remote switchover)
21-T/R(Terminal block/remote switchover)
22-PIDIR(PID integration value reset)
23-PIDD(PID Disable)"
2 10 X
Yearly Inspection and Appendix
Chapter 6
Multi-Functional Placer
STM1-S Maintenance Handbook
6-10
Ring blower inverter setup
Yearly Inspection and Appendix
H04 Number of motor poles is selected. 2/4/6/8 poles [P] 4 2 X
H05 Motor rated current “This value is set according to the inverter capacity.
0.1-800.0[A]"
- 17 X
F01 Output frequency selection "0.00-400.0[Hz]
For sensorless vector control, 0.00-300.0[Hz]"
0.00Hz 60 O
F02 Acceleration 1 is set. 0.1~3000[sec] 30 20 O
F03 Deceleration 1 is set. 0.1~3000[sec] 30 10 O
Yearly Inspection and Appendix
Chapter 6
Multi-Functional Placer
STM1-S Maintenance Handbook
6-11
Consumable Parts List
No Part name Part No. Module Replacement cycle Remark
1 Air Filter
Refer to Air Filter check and
replacement.
2 Mist Separator Filter
Refer to Mist Separator Filter check
and replacement.
3 Detach nozzle pad
Refer to Detach Nozzle Pad filter
check and replacement
4 Head Vacuum Filter
Refer to Head Vacuum Filter check
and replacement.
5 Detach vacuum ejector filter
Refer to Detach vacuum ejector
filter check and replacement
6 Cover Cooling Fan Filter
Cover Cooling Fan Filter cleaning
and replacement.
7 Ionizer Nozzle
Cover Cooling Fan Filter cleaning
and replacement.
8 Fuse Refer to replace fuse .
9 Ring blower fuse
Refer to replace the ring blower
fuse .
Consumable Parts List