STM1-S_SDV_Maintenance(Eng_Ver1).pdf - 第79页

Y e ar ly Inspe ction and Appe ndix Chap ter 6 Multi -Func tional Placer ST M1-S M ain ten an ce Ha nd bo ok 6 -7 Replace the Ring blower fuse Step 7 . Pull th e Fus e ca se to de tac h. Step 8 . Rep lace t he fu se wi t…

Yearly Inspection and Appendix

Chapter 6

Multi-Functional Placer

STM1-S Maintenance Handbook

6-6

Replace the Ring blower fuse

Yearly Inspection and Appendix

Step 4.

Shut off the power supply to the MCCB.

Step 5.

Shut off the power supply to the main power source

cable that is connected to MCCB.

Step 6.

Use a (+) screwdriver to remove the protection cover

from the power panel.

Yearly Inspection and Appendix

Chapter 6

Multi-Functional Placer

STM1-S Maintenance Handbook

6-7

Replace the Ring blower fuse

Step 7.

Pull the Fuse case to detach.

Step 8.

Replace the fuse with a new one.

Caution

When assembling the Fuse case, be careful to ensure the polarity

is correct.

Yearly Inspection and Appendix

Chapter 6

Multi-Functional Placer

STM1-S Maintenance Handbook

6-8

Ring blower inverter setup

Yearly Inspection and Appendix

Ring blower inverter setup

Measures

Step 1.

Refer to the following configuration table for Inverter,

and modify the configuration values of the Inverter.

Function Function name Setup range Initial Setup Modified value

A01 Frequency Command method (various

speed 0 speed command modification)

0-Main body volume

1-Input from control circuit terminal

2-Standard operator

3-Remote operator(1st communication-RJ45)

4-Remote operator(2nd communication-terminal block)"

1 0 X

(Time required: 15min / No. E-3)